1) rotating synthesizing
旋转合成
1.
Wet ball-milling and rotating synthesizing were combined to form a new synthesis technology of cathode materials LiMn2O4 for lithium ion battery.
采用球磨湿混和旋转合成相结合的新工艺来制备锂离子电池正极材料ＬｉＭｎ２Ｏ４，并对制备的材料进行了粒度、化学成分以及电化学性能测试。
2.
Wet ball-milling and rotating synthesizing have been combined in a new preparation technology of cathode material LiNi_ 05Co_ 05O\-2 for lithium ion battery.
采用球磨湿混和旋转合成相结合的新工艺制备了锂离子电池正极材料 L i Ni0 。
2) combination of rotations
旋转运动合成
3) rotational molding
旋转成型
1.
Development of speciality resin suitable for rotational molding;
旋转成型专用树脂MLPE-8050的开发
2.
The principle and characteristics of rotational molding of plastics are introduced.
介绍了塑料旋转成型的原理和主要特点,对旋转成型制品中易出现的气泡和弯曲、收缩现象,以及冲击强度低的原因进行了分析研究,相应地提出了减少或消除旋转成型制品中的气泡,减少或消除制品收缩和弯曲,以及提高制品冲击强度的主要途径。
3.
This paper mainly introduces the design principles of the rotational molding mould, the determination of mould wall thickness and the choosing of mould material.
介绍旋转成型模具设计原理,模具壁厚的确定和模具材料的选用。
4) rotational moulding
旋转成型
1.
An aqueous slurry was developed as a sort of raw materials in rotational moulding for the preparation of short glass fiber reinforced polypropylene composites.
改进了以浆液料作为旋转成型的物料,用于制备短玻璃纤维增强聚丙烯复合材料的新工艺。
2.
The investigation of the drying behavior of the aqueous slurry of powdered polypropylene (PP) using sodium carboxymethylcellulose (CMC) as a suspension stabilizer during heating process in rotational moulding was carried out.
研究了以粉状聚丙烯(PP)为原料、以羧甲基纤维素(CMC)为稳定剂的旋转成型用水性浆液料的干燥行为。
3.
Bubble effect in aqueous slurry of powder polypropylene (PP) using poly(vinyl alcohol) (PVA) as the stabilizer which is used as a sort of raw materials in rotational moulding has been investigated.
研究了以粉状聚丙烯为原料、以聚乙烯醇 (PVA )为稳定剂的旋转成型浆液料中的气泡效应。
5) angular rotation
成角旋转
1.
In order to observe the rehabilitation therapeutic effect of rapid rotation of angular rotation in the treatment of prolapse of lumbar intervertebral disc, the patients were divided into group A: n= 126, undergoing rapid traction of angular rotation combined with routine comprehensive therapyl and group B: n =126, receiving routine comprehensive therapy only.
为观察成角旋转快速牵引对腰椎间盘突出症的康复疗效，将腰椎间盘脱出症患者分为A组126例，运用成角旋转快速牵引配合常规综合疗法治疗；B组126例，运用常规综合疗法治疗。
6) rotary forming
旋转成形
1.
Magnesium alloy is known as a future-oriented,environment-friendly practical structural metal material,and rotary forming is a kind of environment-friendly metal plastic forming technology,so spinning forming technology of magnesium alloy is a high-technique,environment-friendly advanced metal plastic forming technology which is necessary to be developed and researched.
镁合金是面向未来、环境友好的实用结构材料,旋转成形是环境友好的材料塑性成形技术,镁合金旋压技术是非常有必要开发研究的环境友好的金属塑性成形高新技术。
补充资料：旋转-旋转式扫描系统
旋转-旋转式扫描系统
影像学术语。CT设备的类型之一。扫描方式为旋转-旋转式(rotate-rotate，R/R)的CT设备。扫描时X线管和排列成扇形的探测器阵列做同步旋转，属第三代CT机，可用于全身CT检查，是70年代后期以来临床应用的主流机型之一。X线管为旋转阳极，发射大角度扇形线束，探测器多为氙气电离室或为固体探测器，阵列规模通常在数百甚至上千。扫描时间1～4秒。通常具有靶扫描、靶重建、动态扫描、三维成像等特殊程序和多种重建算法、测量分析功能。旋转-旋转式设备在扫描过程中探测器是连续工作的，利用率高，但不能同时进行校准。所获取的每一幅投影轨迹剖面图都是由整个探测器阵列同时采集的信息构成的，个别探测器出现误差便可能使反投影后的重建图像上出现环形伪影(ring artifact)。该型机不具备体积采样能力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条