1) continuous measuring periods
连续测周
1.
Being different from the directly distinguishing phase method of the traditional inductosyn digital display meter, in the paper, we bring forward the method of continuous measuring periods in order to indirectly obtain the induction signal phase, and introduce the circuit module actualizing the method .
区别于传统感应同步器数显表的直接鉴相方法 ,本文提出了一种通过连续测周来间接获得感应信号相移量的方法 ,并介绍了具体实施该方法的电路模
2) continuous periodogram
连续周期图
3) Continuous Monitoring
连续监测
1.
Application of REMPI-TOFMS for Continuous Monitoring of Dioxins in Waste Incineration;
REMPI-TOFMS用于焚烧过程二恶英的连续监测
2.
Electromagnetic radiation law of continuous monitoring and forecasting rock burst in coalmine;
矿井冲击危险电磁辐射连续监测及预测研究
3.
By means of continuous monitoring for the flue gas components and operation parameters,the high-temperature erosion rate of furnace was determined on-line.
通过连续监测炉膛烟气成分和运行参数,以实时确定炉膛高温腐蚀速率,同时利用支持向量机对锅炉效率和氮氧化物排放质量浓度在线建模和遗传算法寻优,获得安全、经济和环保的锅炉运行工况。
4) Continuous determination
连续测定
1.
Study on Continuous Determination of Trace Lead and Cadmium by Polarographic Analysis;
极谱分析法连续测定痕量铅和镉
2.
Continuous determination of molecular ratio of Aluminum Ferric in Kaolin Soil;
高岭土中铝铁含量的连续测定
3.
The study of continuous determination of An, Ag, Ga in chemical prospecting sample by GFAAS;
石墨炉原子吸收光谱法连续测定化探样品中金、银、镓的研究
5) continuous temperature measurement
连续测温
1.
This technique is a good way to replace current discontinuous temperature measurement of molten steel.
介绍了韶关钢铁集团有限公司第三炼钢厂2号板坯连铸机采用连续测温技术进行中间包钢水测温,该技术能实现中间包钢水的连续测温,为连铸生产过程拉速控制提供了温度检测保证,是取代现行钢水间断式测温的好方法。
2.
The major aim of this study was to evaluate the performance of continuous temperature measurement of the liquid steel based on LabVIEW on the spot.
研究的目的是评价一种基于LabVIEW环境的钢水连续测温系统在生产现场的性能。
3.
In order to solve the problem of continuous temperature measurement on hot molten metal, a new method of direct and continuous temperature measurement by thermocouple with bald node is presented as compared the advantages and disadvantages with classical temperature measurement methods.
高温熔体连续测温一直是一个难题。
6) continuous measurement
连续测量
1.
Deduction arithmetic of continuous measurement the radon daughters potential energy;
氡子体潜能浓度连续测量的扣除算法
2.
The measuring instrument can improve the measuring accuracy of water content, and realizes continuous measurement of water content in oil well.
研制的仪器不但提高了测量精度 ,还实现了油井含水率以往难实现的连续测量 。
3.
Firstly, the compatibility of Von Neumann measurement principle and continuous measurement is discussed.
首先讨论了量子力学VonNeumann测量原理与连续测量模型的一致性;然后在连续测量模型的基础上总结了已有量子反馈模型的结果,归纳出量子输出反馈控制系统模型;最后针对单比特振幅退相干抑制问题,利用线性直接输出反馈控制设计反馈控制律,指出利用最优控制的方法设计线性输出反馈控制的比例系数,可以得到较好的结果。
补充资料：连续和非连续孔径射电望远镜
射电望远镜因接收天体射电的天线孔径的构成方式不同，而有连续孔径和非连续孔径之分。连续孔径射电望远镜是射电望远镜的一种最简单的类型，其天线孔径为接收单元所布满，因而天线增益和分辨率全由天线孔径的实际尺寸和形状决定。这类望远镜天线孔径可以有各种形状，如通常的抛物面、球面、抛物柱面、抛物带形反射面等。某些由分立天线（如偶极子天线、裂缝波导等）组成的天线阵，当阵元间距不大于半波长时，由于电场强度方向图和连续面电流分布的场强方向图相似，也被认为是连续孔径射电望远镜。这种情况更常见于线孔径或米波、十米波段的偶极子阵。非连续孔径射电望远镜是天线结构只分布在孔径部分面积内的望远镜，通常由多个天线组成。栅式干涉仪、复合射电干涉仪、栅十字、 T形栅、圆阵、圆环以及综合孔径射电望远镜等都是。这种望远镜的分辨率由天线范围（设想的孔径）的外尺寸决定，而总的天线增益或灵敏度，则取决于全部天线单元面积的总和。图中a所示的连续孔径天线可认为由N个单元面积组成,经天线传至接收机的信号是各单元反射信号的迭加，连续孔径射电望远镜通过焦点处的馈源自动得到这种迭加。由于二单元A、B信号的迭加效果等效于处在A、B的相关干涉仪输出，非连续孔径射电望远镜正是基于这个原理，在省去孔径一部分的情况下,保留连续孔径各单元间的全部间距和取向，如图中b所示的"骨架式"射电望远镜，或者依观测需要对这些间距和取向进行有限的采样（各种干涉阵），甚至用不少于2的有限天线依次采样后进行处理；图中c是综合孔径望远镜。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条