1) thin-wailed box girder element
薄壁箱梁单元
2) the element of thin-walled girder
薄壁梁单元
1.
column form of the element of thin-walled girder virtual work equilibrium equatlon.
用增量问题的物质描述方式，建立了一种考虑大变形小应变空间薄壁梁单元的数学模型；导引了薄壁梁单元u。
3) thin-walled girder element
薄壁梁段单元
1.
The aqueduct body is idealized as an assemblage of thin-walled girder elements.
渡槽槽身采用薄壁梁段单元模型,该单元可以考虑渡槽槽身弯曲、自由扭转、约束扭转以及弯曲扭转耦合振动等结构自身特性;渡槽支架采用普通梁单元模拟,渡槽与支架连接所用的盆式橡胶支座,可用集中弹簧模拟。
4) thin-walled beam-column element
薄壁梁-柱单元
1.
According to the Vlasov\'s premises,the thin-walled beam-column elements considering the cross-section warping effects with 7 degrees-of-freedom at each end are assembled from shell elements by way of displacement coordination of the boundary nodes to participate in the global analysis.
在单元刚度矩阵形成以后采用子结构法对内部结点自由度进行聚缩,根据薄壁构件相关假定并考虑截面翘曲因素的影响,通过边界结点的位移协调条件把壳单元组装成每端7个自由度的薄壁梁-柱单元参与整体分析,可以考虑板件局部屈曲的影响;突破了传统分析的紧凑型截面限制,并通过算例证明了本文方法的精确度和有效性。
5) thin-walled box girder
薄壁箱梁
1.
An experimental study and analyses of steel fiber reinforced high-strength concrete thin-walled box girder with reinforcement subjected to bend;
配筋钢纤维高强混凝土薄壁箱梁受弯性能试验与分析
2.
In order to solve the complex mechanical problem of thin-walled box girder of Y-shape bridge, the authors proposed a spatial finite element with 10 degrees of freedom for every node of the thin-walled box girder by increasing the degrees of freedom based on the theory of elementary beam.
为分析受力复杂的异形薄壁箱梁桥,在初等梁理论的基础上,通过增加自由度的方法,提出每个节点10个自由度的薄壁箱梁分析单元。
3.
A new method was proposed for analyzing the free vibration characteristics of rectangular thin-walled box girder.
以能量变分原理为基础,综合考虑剪力滞后效应、剪切变形和转动惯量的影响,推导出箱形截面梁的控制微分方程和相应的自然边界条件,据此获得几种常用边界条件(简支、悬臂、连续、两端固支)的固有频率方程,提出一种能对工程中常用矩形薄壁箱梁自振特性进行分析的方法。
6) thin-wall box beam
薄壁箱梁
1.
Derivation and application of generalized coordinate method stiffness matrix of thin-wall box beam;
薄壁箱梁广义坐标法刚度矩阵的推导及应用
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条