1) distribution valve
分区阀
2) regionalization
分区
1.
The regionalization and distribution types of the bryophytes in China;
中国苔藓植物的地理分区及分布类型
2.
This paper describes a new method for waterway regionalization in generating waterway DEM,which realizes seamless connection of regions and enhances the speed of generating waterway DEM.
针对航道的带状区域特征,提出了建立航道数字高程模型的一种分区技术,首先对航道进行分区,各分区再生成DEM,最后对各分区DEM进行无缝连接,提高了航道数字高程模型的建立速度。
3.
To enhance the speed of constructing waterway plane triangle-net, this paper presents a new waterway regionalization method, which solves some questions in waterway regionalization and greatly enhances the speed of obtaining plane triangle-net.
以提高航道平面三角网生成速度为目的,提出一种新的航道分区方法,有效地避免了航道分区中的一些问题,并且成倍地加快了平面三角网的生成速度。
3) division
分区
1.
Computing method of divisional ecological and environmental water requirement for river channel and its application to the Yellow River Basin;
河道生态环境分区需水量的计算方法与实例分析
2.
Division of Palm Regarding Total Palmar Digital Nerve and Total Palmar Digital Artery;
手掌分区与指掌侧总神经和指掌侧总动脉
3.
Evaluation on composition and division of cropland value in Fujian based on GIS;
基于GIS技术的福建省耕地价值构成与分区评价
4) zoning
分区
1.
Ecological function zoning in Liaoning Province.;
辽宁省生态功能分区研究
2.
Research into functional mixing and zoning of medieval European cities;
中世纪欧洲城市的功能混合与分区研究
3.
Risk zoning and assessment of loose earth landslides along the bank of the Chongqing Resservoir;
重庆库区松散土体滑坡危险性评价——万州区天城实验小学滑坡危险性分区评价
5) partition
分区
1.
The deformation partition on the collapsed accumulation body by fractal theory;
崩塌堆积体变形分形分区研究
2.
The Climatic Characteristics Analysis And Objective Partition Of Precipitation In Flood Season In Guangxi;
广西汛期降水气候特征分析及客观分区
6) subarea
分区
1.
Study on Subarea Bearing Capacity of Foundation in Loess District;
黄土地区地基承载力分区的研究
2.
On function subarea of tourism environment of scenic and historic area of Zhongshan in Nanjing;
南京钟山风景名胜区旅游环境功能分区研究
3.
Preliminary study on subarea of soil nutrients at the county level in karst mountainous region;
喀斯特山区县级尺度土壤养分分区初探
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀 | 减压阀 | 顺序阀 | ||
控制油路的特点 | 通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0 | 通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定 | 直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力 | |
出油口情况 | 出油口与油箱相连 | 出油口与减压回路相连 | 出油口与工作回路相连 | |
泄漏形式 | 内泄式 | 外泄式 | 内泄式 | |
进油口状态及压力值 | 常态 | 常闭(原始状态) | 常开(原始状态) | 常闭(原始状态) |
工作状态 | 进出油口相通,进油口压力为调整压力 | 进油口压力低于出油口压力,出油口压力稳定在调定值上 | 进出油口相通,进油口压力允许继续升高 | |
联接方式 | 并联 | 串联 | 实现顺序动作式串联作卸荷阀用时并联 | |
功用 | 定压、溢流或安全作用限压、稳压、保压 | 减压、稳压 | 不控制系统的压力,只利用系统的压力变化控制油路的通断 | |
进油腔压力p1控制阀芯移动 | 出油腔压力p2控制阀芯移动 | 进油腔压力p1控制阀芯移动 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。