2) membrane wall pipe
膜式水冷壁管道
1.
Welding deformation is control between membrane wall pipe and stream header;
膜式水冷壁管道与集汽集箱焊接变形的控制
3) membrane wall
膜式水冷壁
1.
As the radiation heating surface,the membrane wall is installed in the down pass of the CDQ waste-heat boiler.
分析了作为辐射蒸发受热面的膜式水冷壁布置于干熄焦余热锅炉的竖直烟道内,在低热负荷下水循环安全问题。
4) membrane water wall
膜式水冷壁
1.
A group control system of multi welding power supplies based on DSP was applied to membrane water wall welding machines.
基于DSP的多焊接电源群控系统被应用于膜式水冷壁焊机中。
2.
The whole configuration and operational principle of Membrane water wall welding machine were introduced in brief in this paper.
简要介绍了膜式水冷壁焊机的总体结构和工作原理。
3.
In the paper, membrane water wall temperature fields of 600 MW supercritical boiler of Qinbei power plant were calculated out in many work condition by numerical method.
针对沁北发电厂600MW超临界压力锅炉膜式水冷壁,通过数值方法模拟了多种工况下水冷壁的温度场,分析了背火侧两个关键点的温差与向火侧危险点温度的关系,拟合出了关系式。
5) membrane waterwall
膜式水冷壁
1.
Calculation of membrane waterwall temperature fields in power plant boilers;
电站锅炉膜式水冷壁温度场特性的数值计算
2.
The temperature fields of the membrane waterwall in burner zone of a 600 MW boiler under different supercritical conditions are analyzed and calculated based on finite-element method.
基于有限元法对某电厂600 MW机组锅炉在不同超临界工况下燃烧器区膜式水冷壁的温度场进行了分析和计算。
3.
A finite-element calculation model was established for temperature field in membrane waterwall of supercritical boiler.
建立了超临界锅炉膜式水冷壁温度场的有限元计算模型,系统地分析了管壁、鳍片、水垢和积灰厚度对水冷壁温度分布的影响。
6) membrane type water wall
膜式水冷壁
1.
Keeping this in mind, the paper advances some ideas concerning structural design improvements of membrane type water wall grid plates; which may represent a new trend in design.
该文针对上述问题提出了改进膜式水冷壁布风板结构的设计思路,表明了一种新的设计动向。
补充资料：管式膜装置
分子式：
CAS号：
性质：把具分离功能的膜复合于烧结聚乙烯等多孔圆管的外壁，或圆管中心孔壁上，就制成外压管式元件，或内压管式元件。把管式元件装入耐压套筒中，制成管式组件。以膜分离过程所需压力为依据，匹配泵和其他设备，就装配成管式膜装置。其优点是组件内原料液流动状态好，换膜方便，适合分离浊度较高的料液，可机械清洗膜面污垢，但膜装填密度小，设备投资较高，能源消耗也高。
CAS号：
性质：把具分离功能的膜复合于烧结聚乙烯等多孔圆管的外壁，或圆管中心孔壁上，就制成外压管式元件，或内压管式元件。把管式元件装入耐压套筒中，制成管式组件。以膜分离过程所需压力为依据，匹配泵和其他设备，就装配成管式膜装置。其优点是组件内原料液流动状态好，换膜方便，适合分离浊度较高的料液，可机械清洗膜面污垢，但膜装填密度小，设备投资较高，能源消耗也高。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条