1) leading mark
导标
1.
In comparison with the design parameters of the leading mark alternative of an as-built port and on the conditions of not changing the leading range and front leading mark conditions, 5 supplementary alternatives which try to adjust the space of the front and back leading marks and elevation of the back leading mark are provided, with relevant parameters calculated and compared.
针对已建的某港导标方案的设计参数为比照对象 ,在导标引导范围及前标条件不变的基础上 ,试以调整前后标距及后标高程增补 5个方案 ,并计算有关参数与之比较。
2) mark guidance
标识导向
1.
The underground mark guidance can assists the crowd to make aware the underground space environment.
随着世界各国对环境恶化和资源紧缺问题的日渐关注,合理利用地下空间已经成为当今世界发展的主旋律,地下标识导向则是辅助人群认知地下空间环境重要导向系统。
3) navigation line
导航标尺
1.
The high-speed feature of FPGA chip makes it well suite for real-time applications,and a fast implementation of edge detection of navigation line on a FPGA was presented.
因而复杂背景下导航标尺的快速鲁棒检测就更加困难或计算更加复杂。
4) diversion criterion
导流标准
1.
The relationship between the construction diversion expected lost and diuersion criterion was explained by using the effect theory and determining the construction diversion system effect function and then the diversion criterion effect balance principle was put forward too in this paper to make the diversion criterion optimized.
通过施工导流系统效用函数的确定,用效用理论阐述了施工导流期望损失与导流标准的关系,提出了导流标准效用均衡原则,使其导流标准达到优化。
5) guiding sign
导向标志
1.
Consielering the design of passenger guiding sign in subway,this paper illuminates the principle and aim of subway passenger guidance as scientific and normative with human-oriented characteristic and ideas.
车站乘客导向标志的设计,应科学严谨、规范统一,体现人性化的特征和理念。
2.
The guiding problem existing in urban passenger transport hubs is in evidence,and one of the main reasons is because the guiding sign design lacks an evaluation basis.
城市客运枢纽导向问题突出,主要原因之一是导向标志设计缺乏评价依据。
6) diversion standard
导流标准
1.
Study on Concrete Face Rockfill Dam Construction Diversion Standard and Flood Passing Measures During Construction Period;
混凝土面板堆石坝施工导流标准及施工期渡汛措施研究
2.
So the study of diversion standard and diversion mode is the difficulty and emphases in designing of diversion.
糯扎渡水电站工程具有坝体高、库容大、导流流量大、蓄水历时长等特点,因此导流方式、导流标准等的研究是导流设计的难点和重点。
3.
The article has analyzed the risk of the optimization of diversion standard in the large-scale hydropower project and have made a model of Diversion Standard Multipurpose TOPSIS in the risk management decision, through quantitative multipurpose analysis of the factors which will affect the diversion standard,such as project investment,building period,risk lose and the diversion risk.
以大型水电工程导流标准优选作为风险分析的对象,通过对影响导流标准的工程投资、建设工期、风险损失以及导流风险各个要素进行定量多目标分析,建立了导流标准多目标理想点逼近技术风险决策模型,最后通过实例验证了该方法的可行性,从而为大型水电工程项目风险管理决策方法进行了有益的探索。
补充资料：《纺织品纤维含量的标识》(FZ／T01053—1998)
《纺织品纤维含量的标识》(FZ／T01053—1998)
Textiles-Designation of Fibre Content
FangZhiPin Xian明1 Honliong de BiaOZhi《纺织品纤维含t的标识》(万刀T 01053一1998)(爪荡￡幼郎.加匆刁以勿nof踢。。几饱瓜)纤维种类及其含量是纺织品品质标志的重要内容之一。根据纺织制品形式和结构，提出了标注纤维含t的具体要求，解决了不同产品标识的统一问题，如带里料的产品应对里和面分别标注;带填充物的产品应把填充物和套分别标注;二种以上的不同织物拼接或镶嵌的产品应分别标注不同织物;只起装饰作用而不作为产品主体的可以不标。规定统一采用国家标准规定的纤维名称，避免了任意标注商品名称、外来语名称等造成的纤维名称混乱问题;规定了以成品中某种纤维的量占纤维总量的百分数表示，而不以生产实际的投料比例标注，解决了纤维含t概念(即基数不清)的问题。明确规定了各种纺织品的纤维含量允差，既与原有的纺织品标准衔接，又明确了各种单一纤维纯纺、二组分或多组分纤维混纺或交织产品的明示含t值与实际值可允许的差值，使标准具有可操作性，解决了含t偏差判定的根本问题，使市场抽查有据可依。对统一纤维成分及其含量的标识起到了积极的指导作用，对保护消费者的利益，维护生产者的合法权益有着重要意义。(郑宇英)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条