1) Twin Shear Unified Yield Criterion
双剪统一屈服准则
1.
A unified solution of plastic limit of simply supported circular plates subjected to border uniform distributed loading is presented based on the Twin Shear Unified Yield Criterion.
采用双剪统一屈服准则首次对金属类材料的简支圆板在边缘均布载荷作用下的塑性极限进行求解 ,得出相应的统一解形式。
2.
Based on the twin shear unified yield criterion, the plastic limit loads of simply supported circular plate under uniform annular load are given.
本文采用双剪统一屈服准则首次对受环形均布荷载作用下的简支圆板进行了塑性极限分析,得出了相应的统一解形式。
3.
Based on the Twin Shear Unified Yield Criterion,the ultimate load of clamped circular plates under linear distributed load is obtained.
运用双剪统一屈服准则,对线性荷载的两种不同分布形式作用下的固支圆板进行了弹塑性分析,分别得出了相应的统一解形式。
2) three shear stress unified yield criterion
三剪应力统一屈服准则
1.
The three shear stress unified yield criterion has been app.
提出了三剪应力统一屈服准则,三剪屈服准则可更大限度地发挥材料的强度潜力。
3) twin shear stress yield criterion
双剪屈服准则
1.
A calculating formula of compression strength for cement-stabilized soil in different sample sizes ratio of height to width (or ratio of height to radius) and surface frictional forces has been derived by twin shear stress yield criterion.
推导了圆柱体试件和长(立)方体试件,分别在不同表面摩擦力和不同高宽(径)比下基于双剪屈服准则下抗压强度的理论计算公式,并与实验结果比较所得结果与实验结果甚为吻合。
2.
The yield conditions of axisymmetric circular plate and shallow spherical shell of reinforced concrete based on Twin shear stress yield criterion are presented in the paper.
导出了基于双剪屈服准则的钢筋混凝土球扁壳的屈服条件 ,并利用此屈服条件求解出其极限荷载。
3.
Then the yield conditions of the reinforced concrete plates with bilateral layout are derived employing the twin shear stress yield criterion.
利用双剪屈服准则建立了用机动法计算钢筋混凝土薄板极限载荷的新的塑性铰线理论 ,并导出了双向布置钢筋的钢筋混凝土板的屈服条件 ,实例计算表明其更符合实验结果 。
4) unified yield criteria
统一屈服准则
1.
This paper establishes a unified plastic model for meralic materials regarded the unified yield criteria as plastic potential.
以统一屈服准则中为塑性势。
2.
A new physicalexplanation is given to the unified yield criteria presented early by author.
本文阐述了应力偏量的三种分解形式,给作者早先提出的统一屈服准则以新的物理解释。
5) unified yield criterion
统一屈服准则
1.
The plastic critical analysis of simply supported circular plates based on unified yield criterion under linear and uniformly distributed load was carried out,and two forms of loads were considered.
采用统一屈服准则对线性和均布荷载共同作用下的简支圆板进行了塑性极限分析,并考虑了2种荷载形式,分别得出了极限解的表达式。
6) Twin shear stress yield criterion
双剪应力屈服准则
补充资料：双剪菜
【通用名称】
双剪菜
【其他名称】
双剪菜 (《贵州草药》)
【异名】
蓑参。
【来源】
为萝藦科植物长叶吊灯花的根。
【植物形态】
长叶吊灯花 多年生攀援草本。茎细长。叶对生；有柄；叶片狭披针形，长1.5～3.5厘米，宽2～7毫米，先端渐尖，基部阔楔形，全缘，两面均有绒毛，边缘较密。花腋生，1～2朵，具短花梗；萼细小，5裂，裂片线状披针形，有腺体；花冠管状，黄色，基部膨大，顶端5裂，裂片先端连合；子房上位。蓇葖果披针形。 生于草坡。分布贵州等地。
【采集】
夏、秋采收。
【性味】
辛微苦，温。
【功用主治】
驱风除湿，补虚。
【选方】
①治脚气病：双剪菜、紫荆花各三至五钱，煨水服。 ②治劳伤虚弱：双剪菜五钱，炖肉吃。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条