1) compensate method of elastic deformation
弹性变形的补偿
1.
This paper analyzes the contact stress (contact stress of the round_link) condition of the round_link chain when being pulled,using the theory of elastic mechanics,and also discusses the compensate method of elastic deformation when round_link chain being pulled.
用弹性力学理论分析了圆环链受拉时的接触应力 (圆环链与链轮的接触应力 )状况 ,讨论了圆环链受拉伸时弹性变形的补偿问
2) Deformation error compensation
弹性变形误差补偿
3) deformation compensation
变形补偿
1.
Based on the simulation of radial deformation of plunger couple of high pressure fuel injection pump used for common rail system,seven kinds of plunger couples were designed by using deformation compensation technology.
在有限元对共轨高压泵柱塞偶件径向变形进行仿真计算基础上,采用变形补偿技术设计出7种方案变形补偿柱塞偶件,在自制试验台上分别进行了密封性能试验、偶件变形测试及柱塞偶件载荷特性试验。
2.
Structural optimization in line with the principle of deformation compensation is therefore conducted on base of the coupling effects contour plots,which is proved to be quite effective by compariso.
在耦合效果云图的基础上利用变形补偿的原理对偶件进行结构优化。
3.
Based on the above, it researched the deformation compensation of the bracket .
但是,至今为止真正能实现导弹半筒焊点高质量、高效率焊接的技术仍不完善,本文针对某型导弹半筒压力焊接过程中存在的问题,结合力学理论和有限元模拟对导弹半筒压力焊接系统中托架变形进行分析,并在此基础上进行托架变形补偿方法研究。
4) Elastic Compensation
弹性化补偿
5) elastic compensation method
弹性补偿法
1.
Elastic analysis was used to develop a simple technique called the elastic compensation method to calculate the limit load for complex structures.
该文引入了一种基于线弹性分析的求解复杂结构极限载荷上、下限的方法——弹性补偿法,同时结合三维有限元分析,求解内压下等径三通的极限载荷。
2.
Based on elastic analysis, a simple technique called the elastic compensation method for calculating limit load for complex structures is presented.
鉴于此 ,本文介绍一种基于线弹性分析基础上的简单的求解复杂结构极限载荷下限、上限的方法———弹性补偿法 ,同时结合三维有限元分析 ,求解内压下三通结构的极限载荷。
6) elastic compensator
弹性补偿体
补充资料：弹性变形
分子式：
CAS号：
性质：在弹性限度内，承受外力的物体在去除外力后能够复原的形变。弹性形变包括瞬间弹性(除去外力后可立即恢复的弹性形变)和迟延弹性(随时间的延续可逐渐恢复的弹性形变)两个部分。
CAS号：
性质：在弹性限度内，承受外力的物体在去除外力后能够复原的形变。弹性形变包括瞬间弹性(除去外力后可立即恢复的弹性形变)和迟延弹性(随时间的延续可逐渐恢复的弹性形变)两个部分。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条