1) performance structure
性能结构
1.
The stress distribution and the relation of elastic deformation to its structure were obtained,which can be used to optimize the performance structure of flexible graphite corrugated metal gaskets.
0 MPa)下,对厚度为3 mm和2mm、具有3种不同的圆弧半径、波齿距和齿数的金属骨架采用有限元法进行应力分析,得到了应力分布状态及弹性变形与其结构的关系,可用于优化柔性石墨金属波齿复合垫片的性能结构。
2) structural performance
结构性能
1.
Experimental study and analysis on structural performance of the prestressed concrete hollow slabs with the height of 120mm;
120mm厚预应力混凝土空心板结构性能试验研究分析
2.
Research on influencing of partial damage to structural performance of house;
局部冲击损伤对房屋结构性能影响的研究
3.
Comparison on the structural performance of prestressed concrete frames with T-section column and with rectangular section column;
预应力混凝土T形柱框架与矩形柱框架结构性能的比较研究
3) structure property
结构性能
1.
By chosing appropriate metal web,treating with the surface of the metal web,and testing the structure property and electromagnetic compatibility of the composite,the method of designing electromagnetic compatibility composite was achieved,the research result showed that the composite could meet the need of sturcture property,electromag.
根据对树脂基复合材料电磁兼容性能要求分析,给出了树脂基复合材料电磁兼容设计中应该注意的几个问题;通过金属网的优选、表面处理、结构性能表征及电磁屏蔽效能表征,得出了电磁兼容复合材料的设计方法,从试验研究可以得出,采用金属网对复合材料进行改性,可以满足复合材料的结构性能和电磁兼容性能的要求。
2.
In this paper, the test and analysis of LDPE structure property during capillary dynamic extrusion were carried on, and the effect of vibration force field on the structure property of the extrudate was discussed.
通过对毛细管动态挤出时 L DPE的结构进行测试分析 ,探讨了振动力场对聚合物毛细管挤出物结构性能的影响。
3.
Refering to correlation standard, this subject discusses structure property index s determine, calcuation and drawing up test plan of restressed concrete hollowcore slab by engineering.
本文参照相关标准,并结合工作实际,对预应力混凝土空心板结构性能检测指标的确定、计算及检测方案制定等值得注意的几个问题进行了讨论。
4) structural behavior
结构性能
1.
Research on structural behavior of needle roller components in teasing machine;
起毛机针辊部件结构性能研究
2.
Analysis on the structural behavior deterioration of corroded RC beams;
锈蚀钢筋混凝土梁的结构性能退化分析
3.
Experimental study of the structural behavior of the negative bending zone of steel box-prestressed concrete composite beams
钢箱-预应力混凝土组合梁负弯矩区结构性能试验研究
5) structure performance
结构性能
1.
Structure Performances and Testing Analyses\= of FA425 Roving Frame;
FA425型粗纱机结构性能及试验分析
2.
Electromagnetic dynamic plastics injection molding machine was adopted to mold LDPE samples, and these samples were tested on tensile strength, DSC and X Diffraction to explore the influence of vibration frequency and amplitude on the structure performance of products.
采用电磁动态注射机注塑成型LDPE试样,并对其进行拉伸强度、DSC和X射线衍射测试来探讨振动频率和振幅对制品结构性能的影响。
3.
In this paper,the influence of construction error on super high-rise steel structure performance is analyzed with SATWE and ETABS based on an actual project,aim to provide some references for the similar projects.
超高层钢结构安装过程中的柱身垂偏等施工偏差对结构性能的影响程度是工程中经常遇到的问题。
6) Structural behaviour
结构性能
1.
The effect of transfer girder on the structural behaviour of Multistorey Laminated Truss type Frame (MLTF) in high-rise building is analyzed.
就转换层大梁对高层建筑迭层桁架式框架结构性能的影响进行了分析研究,提出了该结构形式的合理设计建议,并推荐了几种性能较好的结构方案。
2.
Skew arbitrary bridges have special structural behaviour.
斜交异形桥梁具有特殊的结构性能。
补充资料：高性能结构材料
高性能结构材料：结构材料指以力学性能为主的工程材料。高性能结构材料一般指具有更高的强度、硬度、塑性、韧性等力学性能，并适应特殊环境要求的结构材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条