1) residual buckling strength
剩余屈曲强度
2) crankshaft remain strength
曲轴剩余强度
1.
It s very important to calculate crankshaft remain strength.
曲轴修理过程中进行曲轴剩余强度校核十分重要,结合董氏无刻蚀镀铁工艺修复十分可靠。
3) remaining strength
剩余强度
1.
Assessment method for remaining strength of corroded pipeline and its application;
腐蚀管道剩余强度评价方法及其应用
2.
Theory foundation for remaining strength assessment methodology is presented and assessing formula for relative assessment methodology is educed based on individual basic assumption.
建议在单一荷载和简单缺陷形状下,按B31G进行管道的剩余强度评价。
3.
API 579 and F101 are two kinds of common codes in computing the remaining strength of corrosion pipeline for local metal loss.
对API 579和F101这2种目前常用的腐蚀管道剩余强度评定规范中的一些相似点进行了比较,并通过实例说明了各自的优、缺点。
4) residual intensity
剩余强度
1.
Residual Intensity Assessment of Liquid Ammonia Tanks;
在役液氨储罐的剩余强度评定
2.
Residual Intensity Evaluation after Corrosion of the Heater Tubes for Natural Gas and Life-Span Prediction
天然气加热炉管腐蚀剩余强度评价及剩余寿命预测
3.
The near infrared spectra of sunlight or moonlight passing through atmosphere were measured by a CCD spectrometer in the instrument,then the central residual intensity of the water vapor absorption at 935 nm waveband was calculated and the total precipitable water in the atmosphere was derive.
该仪器采用电荷耦合器件(CCD)制作的光谱仪来测量日光或月光通过大气后在750 nm~1 000 nm近红外波段的光谱,进而计算出935 nm水汽吸收带相对于889 nm背景的剩余强度,再根据R=0。
5) residual strength
剩余强度
1.
Relationship between mass variation and residual strength change with temperature on 3D C/SiC composites in oxidizing atmosphere;
高温氧化气氛下3D C/SiC质量变化率与剩余强度的相关性
2.
Analysis on wear depth and residual strength of downhole casing;
井下套管磨损深度及剩余强度分析
3.
Analysis on residual strength after casing surface wear caused in casing drilling;
套管钻井用套管外表面磨损后剩余强度分析
6) buckling strength
屈曲强度
1.
Study and Realization on Assessment of Buckling Strength of Ship Structural Plate with Corrosion Damnification;
腐蚀损伤船体结构屈曲强度评估方法研究与实现
2.
Structure optimum of hydraulic hatch cover based on corrosion aspect and buckling strength
考虑腐蚀影响与屈曲强度的液压折叠式舱口盖结构优化
3.
The buckling strength of the stitched composite laminates under the in-plane compressive load is predicted.
基于包含若干分层的缝纫复合材料层合板在面内压缩载荷作用下发生屈曲破坏的机理,即厚度方向上的缝纫线被拉断,把缝纫线的极限伸长率作为层合板屈曲破坏的控制参数,采用能量的方法建立了用于预测缝纫复合材料层合板屈曲强度的理论模型。
补充资料：剩余极化强度
分子式：
CAS号：
性质：铁电体经极化处理后，当撤除外电场后，其极化强度并不为零而是保持一有限值，称为剩余极化强度，常用Pr表示。表明已经定向排列的电畴在没有足够的反向电场输入附加能量，就无法回到其原来所处的随机状态。压电陶瓷因具有剩余极化才成为具有实用价值的压电元器件。
CAS号：
性质：铁电体经极化处理后，当撤除外电场后，其极化强度并不为零而是保持一有限值，称为剩余极化强度，常用Pr表示。表明已经定向排列的电畴在没有足够的反向电场输入附加能量，就无法回到其原来所处的随机状态。压电陶瓷因具有剩余极化才成为具有实用价值的压电元器件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条