1) shearing force bolt connection
剪力螺栓连接
1.
Determination of the shear plane quantity of shearing force bolt connection;
剪力螺栓连接剪切面数目的确定
2) stud shear connector
栓钉剪力连接件
1.
The working mechanism of stud shear connector and main effects on the shear strength are found.
通过对推出试件中栓钉剪力连接件的实际抗剪强度的深入研究分析,找出了栓钉连接件的工作机理及影响其抗剪强度的主要因素,对我国现行规范中关于栓钉连接件抗剪强度计算公式提出了修正建议。
3) bolted connection subjected to eccentric shear
偏心受剪螺栓连接
4) sets of torshear type high strength bolt
扭剪型高强螺栓连接副
1.
9S sets of torshear type high strength bolt used for the steel structure was analyzed by means of test for chemical composition,hardness,wedge load,assured load and tight axle strength.
9S扭剪型高强螺栓连接副紧固轴力偏低的原因进行了分析。
5) Bolted connection
螺栓连接
1.
Contact friction mechanism and finite element analysis of beam-to-column bolted connections;
梁柱螺栓连接中接触摩擦机理及有限元分析
2.
The performance of bolted connection in aluminum alloy which carried both tension and shear are analyzed based upon the finite element analysis(FEA).
通过有限元分析了铝合金构件普通螺栓连接同时抗拉抗剪性能,选取了4。
6) connecting bolt
连接螺栓
1.
In one installation, several flange connecting bolts ruptured.
某装置多根法兰连接螺栓发生断裂,经化学成分分析、金相分析、断口的微观形貌、宏观形貌分析、腐蚀产物的能谱分析等一系列研究分析,确定该螺栓含碳量偏高,且处于腐蚀环境,失效为晶间型的应力腐蚀导致的断裂失效,并对如何预防该类连接螺栓再次发生失效提出建议。
2.
The fracture reasons of connecting bolt of piston head and piston skirt in a diesel engine for ship were analyzed by OM,SEM and EDS etc.
采用光学显微镜、扫描电镜和能谱分析等检测手段对船用柴油机活塞头和活塞裙的连接螺栓断裂原因进行了分析。
3.
In order to solve the unreliability problem in connecting caused by the use of ordinary bolt in ground down lead of power transmission line reinforced concrete pole,the deficiencies of the ordinary bolt are analyzed through typical examples,then one kind of new connecting bolt is designed specially according to the theory of the relation between resistance and contact face.
为解决输电线路砼杆接地引下线使用普通螺栓连接在运行中存在连接不可靠的问题,通过运行实例分析了普通螺栓的不足之处,根据电阻与接触面的关系理论,设计了一种新的专用连接螺栓。
补充资料：高强度螺栓连接的厂房钢结构
高强度螺栓连接的厂房钢结构
高强度螺栓连接的厂房钢结构
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条