1) delaminate and felt
分层粘结
1.
Regarding the rapid manufacturing technology to simplify plastic mold as the starting point and using aluminum powder as main material,the paper analyses the test results of different adhesives such as epoxy,acrylate and silicon rubber at room temperature to delaminate and felt and solidify.
以简化塑料模具的快速制造工艺为出发点 ,以铝粉为基料 ,对比分析室温固化胶粘剂如环氧树脂、改性丙烯酸酯、硅橡胶在室温下进行分层粘结和固化的试验结果。
2) bonding coating
粘结底层
3) Tack coat
粘结层
1.
The process control of plastering-type external wall is elaborated from base course,thickness of tack coat,paving of grid cloth,thickness of crack resistant layer and external decorative costing,in order to ensure the construction quality of external wall exterior heat-insulation project.
从基层墙面清理、粘结层厚度、网格布铺贴、抗裂层厚度、外装涂饰层等方面对粘贴式外墙外保温的施工过程控制进行了详细阐述,以确保外墙外保温工程的施工质量。
4) bond coat
粘结层
1.
Rockwell hardness tester and knoop hardness tester were employed to evaluate the extent of adhesion between bond coat and top coat.
9 mg/cm2,而有粘结层的试样,其氧化增重大约为0。
2.
Taking three different emulsified asphalt as waterproof bond coat,researching the shear strength and tensile strength of the three different modified emulsified asphalt and ascertaining the optimum amount of them have important significance to guarantee the quality of bridge deck pavement.
以三种不同的乳化沥青为防水粘结层,研究这三种不同改性乳化沥青的抗剪强度、抗拉强度并确定三者的最佳撒铺量,对于保证桥面铺装质量具有重要的意义。
3.
Bond coat is a kind of coating that improved the interface conjunction between the bond coat and the top coat.
粘结层是在陶瓷层与金属基体之间的一层改善陶瓷层与基体粘结性的过渡层。
5) binding layer
粘结层
1.
Test study of varieties and spread quantities for binding layer in asphalt pavement;
沥青路面粘结层品种与洒布量的试验研究
2.
Interface conjunction factors of the ceramic layer/binding layer interface of thermal barrier coatings were calculated on various bonding layer Cr contents with the combination of the empirical electron theory of solid and molecule (EET) and improved Thomas-Ferim-Dirac theory.
结合固体与分子经验电子理论(EET)和改进的TFD理论,计算了在不同粘结层Cr含量下热障涂层的陶瓷层/粘结层界面的界面结合因子,以预测Cr对该界面结合的影响。
6) bonded coating
粘结涂层
1.
Development of Bonded Coating of Super Fine Powder MoS_2with Graphite;
MoS_2超细粉和石墨的粘结涂层的研制
2.
Wear resisting, anticorrosive and anticohesive properties of the bonded coatings such as PEP, FF 1, FM 110 were evaluated.
评价了PEP、FF 1、FM 110粘结涂层的耐磨、防腐蚀和防粘等综合性能。
补充资料：垂向分层理论
垂向分层理论
stratification theory of grains in vertical direction
ehuix旧ng feneeng Iilun垂向分层理论(stratifieation theory of grainsin vertieal direetion)对重选过程中矿粒群在介质中作垂向分层运动机理的阐释。在重选设备内堆置或铺置的动态矿粒群称作床层。借助介质的垂直流动、沿斜面流动或作回转运动使床层松散，是粒群发生分层转移的先决条件。分层是指矿物粒群按密度差形成不同的矿物层;颗粒的粒度以及形状对分层也有重要影响。对于分层的发生机理，曾经有过多种见解，但归纳起来不外两类观点。一类是动力学分层学说，认为分层是按个别颗粒在介质中的运动差异发生的(见自由沉降速度差分层学说、干涉沉降速度差分层学说);另一类是静力学分层学说，认为分层是粒群整体的内在不平衡因素引发的(见悬浮体密度差分层学说、位能分层学说和重介质分层学说)。前一类学说强调了流体动力对颗粒运动的影响，而忽略了颗粒间的静力作用;后一类学说的立论观点则忽视了流体动力对分层的影响，而将床层内颗粒或颗粒群间的静力差异视为分层的决定性因素。 (孙玉波)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条