1) Height of camera tower
摄像塔高度
2) high-speed photography
高速摄像
1.
Research on the Cutter Test System Based on High-Speed Photography Technology for Arundo Donaxl Harvester;
基于高速摄像技术的芦竹收割机切割试验系统的研究
2.
The high-speed changing short-circuiting transfer process in CO 2 arc welding is recorded by high-speed photography.
采用高速摄像技术记录CO2 焊的高速变化的短路过渡物理过程 ,利用计算机数据采集系统通过传感器采集多路信息 ,成功的实现了焊接电弧及熔滴过渡影像与电弧电压和焊接电流波形的同步控制 ,通过对照分析高速摄像所拍的影像和电信号检测法所得的波形关系 ,获得了所反映的焊接短路过渡过程信息 ,分析了CO2 焊短路过渡过程的物理特征 ,提出了CO2 焊短路过渡过程的不同阶段的合理控制方案 ,依此方案进行波控实验。
3.
The motion conditions of free kernel in the threshing and separating space were photographed on line by the high-speed photography.
利用高速摄像技术对自由籽粒在脱粒与分离空间的运动状况进行了在线拍摄,通过对图片再现分析表明,自由籽粒在脱分空间的运动在多数情况下是不稳定的,经常受到脱粒部件、茎秆等的碰撞,其运动速度与运动轨迹会发生变化,但在无外界干扰时运动轨迹是直线。
3) high-speed camera
高速摄像
1.
These methods were high-speed camera and optical signal monitoring.
利用高速摄像及光信号监测两种手段对等离子体的动态变化过程及其对焊接稳定性的影响进行了深入的研究。
2.
On the basis of experiment with digitalized PMIG inverter,one pulse one droplet transition characteristic is analyzed using high-speed camera, parameters set rule is summarized in this paper,and a new linear wire-feed model for aluminum is presented.
在数字化脉冲MIG焊机大量实验的基础上,通过高速摄像分析了脉冲MIG焊铝的一脉一滴熔滴过渡特点,总结出了铝的一脉一滴脉冲参数选择规律,并提出了一种新的铝的线性送丝速度模型。
3.
Meanwhile, movement parameters of the pneumatic lithotrities machine s probe are measured with the high-speed camera, providing the particular useful technique data for the development and production of the pneumatic lithotrities machines and other medical instrumentation.
简要介绍微创技术治疗肾结石中的气压弹道碎石技术,并利用高速摄像技术测量了弹道碎石器探头的运动参数,为气压弹道碎石器的研制提供了详细的技术数据。
5) high-speed video
高速摄像
1.
Studies on lightning discharge processes are the foundation for the accurate simulation of lightning strike process,and the rapid development of high-speed video technology provides a good way to the observation studies on lightning discharge processes.
雷电放电过程的研究是准确仿真模拟雷击过程的基础,高速摄像技术的快速发展为雷电放电过程观测研究提供了有力手段。
2.
The movement of bubbles in water model of slab mold was analyzed by using a high-speed video camera.
采用高速摄像方法分析板坯结晶器水模中的气泡运动规律。
3.
In order to collect welding arc images and to observe droplet transfer process,by using the key technologies of high-speed image pickup,such as back light technology,optical magnification and the selection of high-speed vedio parameters,a valuable high-speed video system with laser as back light is established.
为采集焊接电弧图像和观察熔滴过渡过程,采用焊接电弧高速摄像关键技术(包括背光技术、光学放大率和高速摄像参数的选择),建立了以激光为背光光源的高速摄像系统。
6) high speed video
高速摄像
1.
Application of laser on high speed video of Welding arc;
激光在焊接电弧高速摄像技术中的应用
2.
Application of high speed video to study the bubble movement in water model of slab continuous casting mould;
高速摄像技术在研究板坯结晶器水模内气泡运动的应用
3.
Path of seed dropping and uniformity of seed spacing could be tested,therefore the actual working could be observed by HSVC(high speed video camera).
采用高速摄像技术拍摄气吸式排种器的工作过程,分析排种均匀性与水稻种子姿态的关系及影响种子姿态的因素,找出影响排种均匀性的因素。
补充资料：理论塔板高度
分子式：
CAS号：
性质：又称板高(plate height)、等板高度等。单位理论塔板的长度称为理论塔板高度。它等于色谱柱长度除以理论塔板数。用理论塔板数与板高表示柱效率时是等价的。
CAS号：
性质：又称板高(plate height)、等板高度等。单位理论塔板的长度称为理论塔板高度。它等于色谱柱长度除以理论塔板数。用理论塔板数与板高表示柱效率时是等价的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条