1) traction fracture
正拉断
2) tensile failure
拉断
1.
Through the reduction of friction force and deformation force between the steel wire and die,the tensile failure problem of steel wire workblank during the stamping process was resolved.
存在的主要问题是在冲压过程中钢丝坯料易被拉断,通过减小钢丝和模具间的摩擦力及变形力解决了问题。
2.
The reasons of tensile failure during the upcasting of C65100 silicon bronze bar were analyzed and discussed.
对硅青铜C65100合金棒坯上引过程中拉断原因进行了分析探讨,提出了上引法生产该合金棒坯的熔炼工艺和铸造工艺。
3) Traction fracture
正断
1.
Combined the microcosmic mechanism of metallic fracture, the conclusion is drawn that the fracture toughness KIC for plane strain as a traction fracture index, only reflects the capability of material traction fracture.
通过分析不同材料特性和应力状态对断裂韧度KΙC的影响,结合金属材料断裂的细观机理,认为平面应变断裂韧度KΙC反映的是材料正断的性能,仅代表材料发生正断的指标。
4) tensile fracture
拉伸断口
1.
A tensile facture fractal model of grain filled polymer composites on the base of the fractal theory was established,and an equitation of the tensile fracture fractal dimension was proposed.
基于分形理论构建了颗粒填充高分子复合材料拉伸断口的分形模型,进而提出了分形维数计算公式。
2.
The microstructure and tensile fracture of railway vehicle rivet were analyzed by OM and SEM.
结果表明,铆钉拉伸断口上产生凸台阶的主要原因是在槽口边缘形成的裂纹扩展到心部之前,又在中心形成新的裂纹,且在这些中心裂纹处发生塑性变形。
3.
Using the scanning electronic microscope(SEM), orienting to the low carbon ductile iron with pearlite matrix, ferrite matrix and Quasi-as-cast bainite matrix, the analysis and research have been done about the tensile fracture's shape and appearance of low carbon ductile iron.
利用扫描电镜(SEM)对珠光体、铁素体和准铸态贝氏体金属基体的低碳球铁拉伸断口形貌进行了分析和研究。
5) tensile fracture
拉伸断裂
1.
Effects of interfacial IMC on tensile fracture behavior of Sn-3.0Ag-0.5Cu solder joints on copper substrates;
界面金属间化合物对铜基Sn-3.0Ag-0.5Cu焊点拉伸断裂性能的影响
2.
Thermographic detection method of tensile fracture process for cracked metal specimens;
含裂纹金属拉伸断裂过程的热像检测方法
3.
Characteristics analysis of acoustic emission signals from steel specimens under tensile fracture and fatigue crack condition
钢制试件拉伸断裂及疲劳开裂声发射特征分析
6) tensile fracture surface
拉伸断口
1.
The tensile fracture surface was also observed by SEM.
本文对A356铝合金进行了金相及场发射扫描电镜试验,对分布在初生α-Al基体上的共晶硅相、富铁相及气孔等进行了观察,分析了它们的分布特征、形貌及影响;用扫描电镜观察铝合金的拉伸断口形貌,表明其断裂是以脆性断裂为主的混合断裂,并研究了其断裂过程及机理。
2.
The tensile fracture surface possess the mixed-rupture characteristics of cleavage step,minute lacerated ridge and tough dimple existence.
AZ91D合金拉伸断口表现为既有解理台阶又存在细小撕裂棱及韧窝的混合断裂特征,加入1%Ce后,合金断口的韧性断裂特征增加,有利于提高合金的室温力学性能。
补充资料：断正
1.判断确定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条