1) dynamic viscosity
动力黏度
1.
On the basis of the experiment, the factors affecting the stability namely the equivalent diameter of the nano-particles and the dynamic viscosity of the base fluid are discussed and some valuable conclusions are obtained.
对不同基液制备的SiO_2纳米颗粒悬浮液稳定性进行了实验观察,并在此基础上,深入讨论了颗粒的当量直径、基液动力黏度等因素对悬浮液稳定性的影响,得到了一些有意义的结论。
2) stokes
[stəuks]
史托(动力黏度单位)
3) kinematic viscosity
运动黏度
1.
The correlativity between four physical properties,including Δd(Difference of density)、lnν(Logarithm of kinematic viscosity)、w(CCR)(Mass fraction of carbon residue)and w(S)(Mass fraction of sulfur)and SARA mass fractions of atmospheric residue and vacuum residue was respectively discussed.
对常压和减压渣油的四组分质量分数(w(SARA))与密度差(Δd)、运动黏度对数(lnν)、残炭值(w(CCR))和硫质量分数(w(S))4个简单易测物性的相关性进行了考察。
2.
The different mass concentrations of the three surfactants,sodium dodecyl sulfonate(SDS),cetyltrimethyl ammonium bromide(CTAB) and oleic acid were added into Lungu atmospheric residue(LGAR),respectively,to investigate their effects on the 80℃ kinematic viscosity,colloidal stability,contents and average relative molecular mass of SARA four fractions of LGAR.
以轮古常压渣油(LGAR)为原料,分别加入不同质量分数的表面活性剂十二烷基磺酸钠(SDS)、十六烷基-三甲基溴化铵(CTAB)和油酸(Oleic acid),考察了它们对LGAR的80℃运动黏度、体系胶体稳定性、四组分含量及数均相对分子质量的影响。
3.
The kinematic viscosity values of the saturated liquid dimethoxy methane are reported over the temperature range from 248.
本文的主要工作是,利用改型的乌别洛特毛细管黏度计对DMM的饱和液体运动黏度进行了实验研究,温度范围为2 4 8 4 6 7～35 3 15 4K ,为DMM作为替代清洁燃料的研究提供了基本的物性数据。
4) dynamic viscosity
动态黏度
1.
It was concluded that the elastic modulus G′, loss modulus G″ and dynamic viscosity η~ of PLA and its copolymers increases with the increasing of the molecular weight.
结果表明,随着分子量的增加,聚乳酸及其共聚物熔体的弹性模量G′、损耗模量G″及动态黏度η*大幅度地提高,出现假固态行为;分子链柔性较好的共聚组分PEG的引入降低了共聚物熔体的G′、G″及η*;聚合物分子量的多分散性导致聚合物熔体的流动出现了非终端效应;聚乳酸的引入使聚丙烯熔体的G′、G″及η*都有所下降,马来酸酐接枝改性的聚丙烯的引入增大了共混物的G′、G″及η*。
2.
The dynamic viscosity of the HEC solution increased nonlinearly with the increase of the HEC mass fraction.
研究了碱溶性HEC纺丝原液在不同温度、不同质量分数和不同角频率下的动态黏度特性,表明HEC/NaOH溶液为切力变稀的非牛顿流体。
3.
Based on dissipation mechanism of shearing power,a new method of modeling dynamic viscosity of polymer melts in vibrating shear flows was proposed in this paper.
基于剪切功率的耗散机理,提出了一种计算振动剪切流场中聚合物熔体动态黏度的粘性耗散法,并建立了理论模型。
5) torsion viscometer
扭力黏度计
6) adhesion kinesics
黏附动力学
1.
7-4[MRP+EF+],8-3[MRP+EF-],ZH-1[MRP-EF+],and control strains LN-2 [MRP-EF-] were chose in adhesion kinesics test to PK-15 cells.
为研究携带不同毒力因子的猪链球菌2型对细胞侵袭作用的差异,本实验室从全国各地分离100多株猪链球菌,PCR鉴定出10株链球菌2型,其中携带毒力因子菌株为7-4[MRP+EF+]、8-3[MRP+EF-]、ZH-1[MRP-EF+],另外选择1株LN-2[MRP-EF-]与PK-15细胞进行黏附动力学试验,结果表明MPR毒力因子与菌株对PK-15细胞黏附具有密切相关性。
补充资料：动力黏度
分子式：
CAS号：
性质：见黏度
CAS号：
性质：见黏度
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条