说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 内弹道性能参数
1)  inner ballistic functional parameter
内弹道性能参数
1.
Take certain missile launcher as the main object, the reliability evaluation methods of the canister s inner ballistic functional parameters were introduced(namely: Bayes method and Monte Carlo digital simulation method).
以某导弹发射装置为主要研究对象 ,介绍了可对其筒内弹道性能参数进行可靠性评估的方法 ,即 :Bayes方法和Monte -Carlo数字仿真法。
2)  interior ballistic parameter
内弹道参数
3)  Interior ballistic performance
内弹道性能
1.
At last it gives the model of the interior ballistic performance and characteristics of erosion and abrasion of gun barrel.
通过对某加农炮的身管烧蚀磨损特征数据进行分析整理,确定了身管烧蚀磨损特征面,采用了多特征面来表述火炮内弹道性能变化。
2.
This paper discussed the ways of inspection on the interior ballistic performance of ammunition in stock without the use of standard ammunition or ballistic gun.
论述了在没有标准弹和弹道炮的情况下 ,如何对库存弹药实施内弹道性能检测。
3.
The reasons of abnormal interior ballistic performance of an equilibrium launcher at high and low temperature are analyzed.
针对某平衡炮武器系统高、低温内弹道性能异常的问题,建立了平衡炮的内弹道方程,并计算了其常、高、低温内弹道性能。
4)  internal ballistic property
内弹道性能
1.
Coupling computation on radial vibration of chamber structure and internal ballistic property for solid rocket motor;
固体火箭发动机燃烧室结构径向振动与内弹道性能的耦合计算
5)  Interior ballistic property
内弹道性能
1.
The paper studies the traditional method of examining interior ballistic property ot ammunition and finas out that it exist some inherent defects.
本文对弹药内弹道性能检验的传统方法存在的问题进行了分析,提出了一种新的检验方法,重点对新的检验方法的数学模型的建立过程进行了论述。
6)  internal ballistic performance
内弹道性能
1.
It is found from the study that the amount of the igniter charge can be of significant effect on the Ft curves and internal ballistic performances of an impulsive microthruster,due to its ratio of igniter charge to main propellant charge being obviously different from that of conventional SRM.
研究了用于高速动能导弹和超高速火箭弹道修正的微型脉冲推力器的三种推力—时间(F-t)曲线,发现由于脉冲推力器点火药量与主装药量之比明显高于常规固体火箭发动机该两者的比值,点火药量的多少会对推力器F-t曲线的形状和内弹道性能产生明显影响。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条