1) regular concave
规则凹坑
1.
A pin on ring test rig was used to investigate the effect of regular concaves on the tribological behavior, with an emphasis place on the effect of the regular concave size on the lubrication behavior.
给出了一个研究规则凹坑对表面摩擦性能影响的三销环试验方案 ,考察了面接触下不同尺寸的规则凹坑对表面润滑性能的影响 。
2) regular concave surface
规则凹坑表面
1.
Connectivity analysis of regular concave surfaces
规则凹坑表面的连通性分析
3) irregular pits
不规则沉坑
1.
According to injection molding troubleshooting,the irregular pits on the surface of the plastics parts were unusual but hard to solute.
着重探讨了注塑成型过程中一些非常难以处理的不规则沉坑缺陷的解决方法,分析其产生原因,并借助Moldflow软件进行分析验证。
4) dimple
[英]['dɪmpəl] [美]['dɪmpəl]
凹坑
1.
Review of heat transfer enhancement for dimpled surface;
凹坑强化传热的研究进展回顾
2.
Influence of dimple space on heat transfer enhancement and pressure loss in a dimpled rectangular channel
间距对凹坑强化传热和流动阻力的影响
3.
The application shows that the optimization can greatly reduce the dimple magnitude and improve the punching quality.
实践证明:优化后的凸模在很大程度上减小了凹坑的塌陷量,提高了产品质量。
5) pit
[英][pɪt] [美][pɪt]
凹坑
1.
Limit load analysis on spherical head with pit located in the structural discontinuity area;
球形封头上结构不连续处凹坑极限载荷分析
2.
Cause Analysis and Prevention of Pit Defect on Drum after Plate Winding;
钢板卷筒后筒体表面凹坑缺陷的成因分析与预防
3.
Safety Assessment for Featheredged Sleeve Press-Ure Vessel Containing Pit Defects and Research for Fatigue Life of Numerical Simulation;
含凹坑缺陷薄壁圆筒形压力容器的安全评定以及疲劳寿命的数值模拟研究
6) part-through slot
凹坑
1.
40 of "pressure vessels periodical inspection regulation",the stress distribution of local thinned area in the boundary stress region of nozzle-cylinder is calculated and the trends of stresses influenced by the dimension and location of part-through slot are obtained.
参考《压力容器定期检验规则》第40条,采用有限元方法计算了筒体接管边缘应力区局部减薄处的应力分布,得到了局部减薄处凹坑的尺寸与位置对应力的影响趋势,讨论了应力集中系数随尺寸变化的规律,为筒体接管边缘应力区局部减薄处的强度评定提供了一定的计算依据。
补充资料：凹坑
分子式：
CAS号：
性质：半导体在像工艺中的一种局部区域缺陷，其特征是图像从边界向内部延伸的缺损。
CAS号：
性质：半导体在像工艺中的一种局部区域缺陷，其特征是图像从边界向内部延伸的缺损。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条