1) coupling deformation
耦合变形
1.
On micro scanning forces under the coupling deformation of atomic force microscope probe;
原子力显微镜探针耦合变形下的微观扫描力研究
2.
According to the theory of thin-walled bar with closed section,a combined mod-el is esta blished of coupling deformation,and an accurate method of analysing stresses between lay-ers is suggested.
用封闭截面薄壁杆理论建立的夹芯杆耦合变形的组合模型得到了芯层应力和层间结合应力的精确化分析方法，并给出了箱形截面杆的分析结果。
3.
Only the wall rock of tunnel was stressed uniformly,the objective of coupling deformation would be realized,that can enable the tunnel wall rock stress and support pattern to reach the optimal combination and decrease the cost of support.
得出了只有使巷道围岩受力均匀,达到耦合变形的目的,才能使围岩压力与支护方式达到最佳组合,降低支护成本。
2) coupled deformation
耦合变形
1.
Based on Von Karman s deformational theory,the coupled effects between the coupled deformation of middle plane of beams and large overall motions is presented.
基于 Von- Karman变形理论 ,描述了弹性梁中面的耦合变形和大范围刚体运动之间的耦合 ,利用 Jourdain速度变分原理和单向递推建模方法建立了由梁式构件组成的树状柔性多体系统的程式化耦合动力学方程 ,通过两个典型算例验证了这种耦合变形和大范围运动之间的耦合效应对作高速大范围刚体运动柔性多体系统动力学性质的影
2.
Results show that the piston thermo-mechanical coupled stress is mainly influenced by mechanical load and coupled deformation is mainly influenced by thermal load.
因此,对活塞在热负荷和机械负荷共同作用下的耦合变形、应力进行有限元分析,了解活塞的变形和应力分布情况,对改进活塞设计,提高其工作可靠性具有重要意义。
4) coupling deformation terms
变形耦合项
1.
Dynamics modeling and frequency analysis for a planar flexible beam with coupling deformation terms;
计及变形耦合项的平面柔性梁动力学建模及频率分析
5) coupling deformation variables
耦合变形量
1.
The second order coupling deformation variables, which have little effect on the dynamic behavioars of the system, are kept in the deformation.
对作大范围运动的薄板建立了耦合动力学模型 ,计及了在结构动力学中对薄板动力学特性影响很小的二次耦合变形量。
6) deformation and transformation coupling
形变和相变耦合
补充资料：大坝内部变形观测(见水工建筑物变形观测)
大坝内部变形观测(见水工建筑物变形观测)
daba neibubianxing guanCe大坝内部变形观测见水工建筑物变形观测。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条