1) wear particles spectrum
磨粒谱
2) debris
[英]['debri:] [美][də'bri]
铁谱磨粒
1.
Based on the detailed introduction of KPCA algorithm,a real case was studied for the purpose of constructing a debris automatic recognition sub-system which can be served for diesel engine fault detection and analysis system.
结合某柴油发动机故障检测与分析系统中铁谱磨粒自动识别的应用实例,并与传统主成份分析方法进行对比分析,结果表明该方法在进行样本非线性特征参数指标综合以及特征维数压缩方面具有可行性和有效性。
2.
The debris recognition approach based on the PCA is presented, and the process of using this approach to deal with the debris recognition is described.
介绍了主成分分析(PCA)基本原理与算法,提出了主成分分析用于铁谱磨粒识别的基本思路和方法,给出了具体的应用步骤,并通过实例对基于主成分分析的铁谱磨粒识别方法有效性进行了分析和验证,结果表明,该方法在减少铁谱磨粒识别工作量和提高识别准确率方面效果良好。
3) particle sudstrate
磨粒谱片
4) abrasive particle
磨粒
1.
The results strongly indicate that both the abrasive particles and porosity in honing stone have an important effect on the service performance.
通过试验对比了国产与进口的氧化铝油石在粗珩阶段的磨削性能,利用扫描电镜观察了油石在加工前后的表面微观形貌,指出油石中磨粒及气孔等因素对油石的磨削能力有较大影响。
2.
The effect of the properties of abrasive particles in slurry, including the morphology and hardness, on the wear resistance of alumina-reinforced yttria-stabilized zirconia polycrystals (3Y-TZP/10wt%Al_2O_3, 10ADZ) was investigated in 5%NaOH slurry containing different abrasive particles using a pin-on-plate tribometer.
在不同磨粒的 5 %NaOH泥浆中 ,采用销 盘式摩擦磨损试验机考察了磨粒对氧化铝增强四方氧化锆多晶陶瓷材料 (ADZ)耐磨性的影响进行了研究。
3.
The wear properties of alumina reinforced Y-TZP composites in 5%NaOH slurry containing different abrasive particle were investigated using a block-on-block friction and wear test apparatus.
采用块 -块摩擦磨损试验机在不同磨粒的 5 %NaOH泥浆中 ,对氧化铝增强四方氧化锆多晶陶瓷材料 (ADZ)的磨损性能进行了研究。
5) wear debris
磨粒
1.
3D measuration and reconstruction technology is introduced in analysis of wear debris.
在铁谱分析中引入计算机三维测量与重构技术,通过使用改进拉普拉斯算子对在普通光学显微镜下拍摄到的磨粒连续图像序列进行清晰度分析来测量磨粒表面高度,重构磨粒三维图像。
2.
The evolutions of wear debris characteristics as wear progress in sliding wear process was studied.
为提高基于磨粒的机器状态监测的准确性,研究了磨粒特征随滑动磨损进程的变化规律。
3.
This project focused on the issue to establish the evaluation approach of surface features of wear components based on surface characteristics of wear debris.
建立了基于磨粒表面信息的磨损表面评估方法。
6) wear particle
磨粒
1.
The design of fractal dimension computing system about the wear particle based on real color;
基于真彩色的磨粒分形维数计算系统的设计
2.
Study about the fractal characterization of the wear particles boundary;
磨粒轮廓分形特征的研究
补充资料：牛柳粒炒杂菜粒
牛柳粒炒杂菜粒
原料：牛肉半斤、杂菜粒一包.
佐料：盐、糖、酱油、黑椒粉(可因个人口味增减)、油、蒜茸(同黑椒粉)、鸡粉。
过程：
1．将牛肉切粒，若不善刀工者可在市场买的时候就请人代劳。用酱油、油、糖、生粉捞一捞。
2．用少少的油热一下锅，爆香蒜茸；
3．将牛肉粒倒进锅里，中火翻炒一分钟，加入黑椒粉、鸡粉，看牛肉转了颜色就可以装出来，不然牛肉会炒老；
4．不用再加油了，倒入杂菜粒(事先要过水)，翻炒一分钟，加一点盐；
5．加入牛肉粒再翻炒1-2分钟；
6．大功告成，上盘。
温馨提示
杂菜粒在一些比较大型的超市里会有配好一包一包售卖的，可以挑选自己喜欢的口味，做菜前只需将其用开水泡一泡就可以了。油不用放得太多，只在开始放上两锅铲就够了，以健康为主。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。