1) disconnect-type block-end forms construction technique
分离式块端模板施工工艺
1.
Connecting with the construction of prestressed continuous rigid-frame of high-level bridge at Maigaoqiao Station of Nanjing Subway and through the analysis on traditional block-end forms construction techniques, this paper puts forward the disconnect-type block-end forms construction technique.
结合南京地铁迈皋桥车站高架桥预应力连续刚构的施工,通过对传统块端模板施工工艺的分析,提出了分离式块端模板施工工艺。
2) process plate
工艺板块
1.
Using some scientific methods,for example,model of process plate for leathermaking and orthogonal experiment,the author made a series of experiments.
本文应用制革工艺板块模式、正交试验法对猪正面服装革复鞣工艺板块进行了系统研究 ,研究了复鞣的优化配伍 ,对影响复鞣效果的若干因素诸如坯革状态、复鞣剂配伍、复鞣剂的加料顺序等进行了探讨 ,初步阐明了多种复鞣剂配伍复鞣的一些基本规律 ,即协同效应、顺序效应和坯革效
2.
Based on the comprehensive development of high-grade pigskin leather, the author applied the methods of system engineering and operational research to study the process of leather making, and put forward the model of process plate of leather-making, tests showed that the technical research process will be more simple, scientific and standard after the application of the model.
在高档猪革综合开发的基础上，结合作者长期工作经验，运用系统工程和运筹学的思想和方法，首次提 出了制革工艺板块模式。
4) partition construction
分块施工
1.
On the optimization of the supporting design and the partition construction in the extra-large deep foundation pits
超大深基坑支护中支撑设计与分块施工的优化
2.
In this article,authors introduce partition construction methods of the base board and wall boards of a large aeration deposition basin.
介绍了大型曝气沉淀池底板、壁板分块施工的方法和措施 ,对底板钢筋的安装和双壁板的支模采取了切实可行的技术措施 ,从而取得了较好的效果。
5) formwork construction
模板施工
1.
From foundation treatment,supporter erection, formwork construction and other aspects construction key points are presented in order to provide references for similar works.
结合工程概况,介绍了现浇梁的施工工艺,并对地基处理、支架搭设、支架预压、模板施工等环节的施工要点进行了阐述,供类似工程参考借鉴。
2.
The crafts principles and operation keys of formwork construction of prepared screw-bolt holes in equipment foundation that are groped in the construction of certain cement plant new-line engineering are introduced, and the author pointed out that the method not only has the advantages such as low cost, easy crafts and so on but also the difficulty of supporting and removing formwork.
介绍了某水泥厂新线工程摸索出的设备基础预留螺栓孔洞模板施工的工艺原理、操作要点,指出此方法成本低、工艺简便,解决了设备基础预留较深孔洞的模板支护及拆除的难题。
3.
In this paper,by using Huluding Bridge in Nanning as an engineering example,steel pipe piles support method,steel formwork constructions technology and C60 concrete construction technology of long connected continuous steel girder component for 3400t 0# block construction are introduced in detail,and new construction technologies used in 0#bolck are summarized.
通过南宁葫芦鼎大桥工程实例,详细介绍了3400 t0#块钢管桩支撑方法、大块钢模板施工及长联钢构的C60混凝土施工技术,总结了0#块施工的新工艺。
6) process template
工艺模板
1.
Process design content is presented by process meta-task and process template.
通过对制造工艺资源特征和工艺元信息的分析,对资源-任务匹配中的关键概念进行了定义,建立面向工艺特征的资源特征和任务表达模型,用工艺元和工艺模板表达工艺设计内容。
2.
With the process template built for the abstract parts as an basis, the CAPP system was developed based on the network and database, consisting of three levels: enterprise integration level, project management level and process planning level.
即以针对归纳总结出的抽象零件而建立的工艺模板为基础 ,开发了基于网络和数据库的具有企业集成层、项目管理层和工艺设计层3层结构的模具CAPP系统。
补充资料：分离式分离机
分子式：
分子量：
CAS号：
性质：又称分离机。根据操作原理分类的一类离心机。用以分离更小固体颗粒（小于5微米）的不同浓度的场合和分离乳浊液和细粒子悬浮液。常用的有管式高速离心机、室式分离机、碟式分离机等。
分子量：
CAS号：
性质：又称分离机。根据操作原理分类的一类离心机。用以分离更小固体颗粒（小于5微米）的不同浓度的场合和分离乳浊液和细粒子悬浮液。常用的有管式高速离心机、室式分离机、碟式分离机等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条