1) reversible proton exchange membrane fuel cell (RPEMFC)
可逆质子交换膜燃料电池
2) proton exchange membrane fuel cell (PEMFC)
质子交换膜燃料电池
1.
Ineffective Pt/C catalysts were reprocessed in order to be reused in proton exchange membrane fuel cell (PEMFC).
回收质子交换膜燃料电池(PEMFC)失效的Pt/C催化剂,通过高温灼烧得到贵金属Pt渣。
2.
Humidifying technology is one of key technologies for proton exchange membrane fuel cell (PEMFC).
增湿技术是质子交换膜燃料电池(PEMFC)的关键技术之一。
3.
The electric performance of a 5 kW proton exchange membrane fuel cell (PEMFC) stack was researched.
对5kW质子交换膜燃料电池(PEMFC)电堆的电压-电流特性、温度特性、压力特性、反应气体计量比特性等进行了测试,并从电化学热力学和动力学两个角度初步分析了各运行参数对电堆性能的影响机理。
3) proton exchange membrane fuel cell
质子交换膜燃料电池
1.
Influence of structural parameters on ordered cathode catalyst layer in proton exchange membrane fuel cells;
结构参数对质子交换膜燃料电池阴极有序催化层的影响
2.
Multi-scale heat transfer and mass transfer of proton exchange membrane fuel cell;
质子交换膜燃料电池的多尺度传热传质
3.
A gaseous water management model for proton exchange membrane fuel cell membrane;
质子交换膜燃料电池膜中气态水管理模型
4) PEMFC
质子交换膜燃料电池
1.
Dual-bonded catalyst layer cathode for PEMFC;
质子交换膜燃料电池双催化层阴极
2.
Ageing Analysis of the Bipolar Plates Fabricated from Aromatic Polydisulfide/Graphite Nanocomposite in Simulated PEMFC Environment;
纳米复合双极板在质子交换膜燃料电池环境中的老化分析
3.
WATER FLOODING AND MASS TRANSFER ENHANCEMENT IN FLOW CHANNELS OF PEMFCs;
质子交换膜燃料电池流道淹没与传质强化
5) proton exchange membrane fuel cell(PEMFC)
质子交换膜燃料电池
1.
Stainless steel 304 was selected as bipolar plate to substitute for graphite plate to reduce the production cost of proton exchange membrane fuel cell(PEMFC).
为降低质子交换膜燃料电池(PEMFC)的生产成本,选择成本低廉、强度高、化学稳定性好的不锈钢材料替代传统的石墨双极板。
2.
A self-humidifying membrane electrode assembly(MEA) used in proton exchange membrane fuel cell(PEMFC) was specially designed and prepared.
设计并制作了一种新结构的质子交换膜燃料电池(PEMFC)自增湿膜电极。
3.
The membrane electrode assembly(MEA) in proton exchange membrane fuel cell(PEMFC) was composed of the proton exchange membrane,catalyst layer,water management layer(WML) and diffusion layer.
质子交换膜燃料电池(PEMFC)的膜电极(MEA)由质子交换膜、催化层、水管理层(WML)和扩散层组成。
6) proton exchange membrane fuel cell(PEMFC)
质子交换膜燃料电池(PEMFC)
1.
To improve the output performance of the proton exchange membrane fuel cell(PEMFC),based on the first-order mathematical model with dead-delay,as a model of output power of thd proton exchange membrane fuel cell(PEMFC),two-degree-of-freedom(2DOF)PID control scheme is proposed based on the model of output power in this paper.
为提高质子交换膜燃料电池(PEMFC)的输出性能,对于其输出功率的一阶滞后数学模型,进行二自由度PID控制方案设计。
2.
Pt-TiO2/C catalyst for the cathode of high temperature proton exchange membrane fuel cell(PEMFC)based on H3PO4-doped polybenzimidazole(PBI) was prepared via a two-step process.
通过两步法制备了掺杂磷酸的聚苯并咪唑(PBI)高温质子交换膜燃料电池(PEMFC)阴极用的Pt-TiO2/C催化剂。
3.
The component of internal resistance of proton exchange membrane fuel cell(PEMFC) has been analyzed in this paper.
分析了质子交换膜燃料电池(PEMFC)的电阻组成,讨论了电池在不同加载策略下其电阻的动态变化情况,并结合在线测得的电池内阻值进行分析,从膜内水含量的角度讨论内阻变化原因,指出电池在不同电流密度下均对应一个相应的内阻值,电流密度越大,电池的内阻值越小;定义了起始内阻Ri的概念,发现电池动态加载时,起始内阻越小,极化程度越小;实验结果发现,电池水淹时内阻会持续下降,提出可以利用实时电池内阻的大小判断电池的实时运行情况。
补充资料：可逆电池
分子式：
CAS号：
性质：指正向、逆向电极反应都是热力学可逆且又无液体接界的电池。可逆电池的必要条件是：(1)电池反应可正、逆方向进行；(2)允许通过的电流很小，电极反应进程中随时接近平衡态；(3)电池内部无液体接界。
CAS号：
性质：指正向、逆向电极反应都是热力学可逆且又无液体接界的电池。可逆电池的必要条件是：(1)电池反应可正、逆方向进行；(2)允许通过的电流很小，电极反应进程中随时接近平衡态；(3)电池内部无液体接界。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条