1) "I" shaped block
工字砌块
2) dolosse
[də'lɔsə]
扭工字块
1.
It introduces the precasting technology of two kinds of practical dolosses.
介绍两种比较实用的扭工字块预制工艺，结合工程中遇到的扭工字块安装密度问题，深入探讨其理论安装密度。
3) masonry
[英]['meɪsənri] [美]['mesṇrɪ]
砌块砌体
1.
According to Eton aerated concrete block with one-line and two-line cavity with different strength axle pressure and shearing test of through structure are made in order to understand basic properties of aerated concrete block as well as the influences of mortar strength and block strength on masonry strength.
对伊通双排孔和单排孔不同强度的加气混凝土砌块进行了轴压和通缝抗剪试验,并对试验数据做了分析,旨在了解加气砌块砌体的基本性能,了解砂浆强度和砌块强度对砌体强度的影响。
2.
Leakage often takes place on the exterior walls with light weight masonry in the frame structure, frame shear wall structure, special shaped columns frame structure or short shear wall structure at the coast areas with more rainstorms.
在沿海炎热多雨多台风地区,以轻质砌块砌体做外围护结构填充框架结构、框架—剪力墙结构、异形柱结构、短肢剪力墙结构体系时,外墙易出现渗漏问题。
4) block masonry
砌块砌体
1.
Firstly,the compressive strengths of hollow block masonry specimens with natural aggregates and recycled aggregates,while some was mixed with fly-ash or polypropyl- ene fibers,were tested and compared.
通过抗压试验,研究了天然混凝土和再生混凝土空心砌块砌体的抗压强度,分析了粉煤灰和聚丙烯纤维等外掺料对再生混凝土空心砌块砌体抗压强度的影响。
2.
A restoring-force experimental investigation on the seismic behaviors of reinforced block masonry shear wall with opening on one-forth-scale has been made.
通过3片1∶4模型配筋砌块砌体开洞剪力墙的伪静力试验,研究了在低周反复荷载作用下开洞墙体的整体工作性能、破坏形态、滞回特性以及恢复力模型。
5) brick
[英][brɪk] [美][brɪk]
砌块
1.
The reutilization of carbide slag to produce bricks;
电石渣综合利用生产砌块
2.
Study on the additive of not sintering phosphogypsum brick;
非煅烧磷石膏砌块的添加剂试验研究
3.
Mini-type concrete brickwork,as the main substitute of clay brick,has the advantage of saving soil and reducing energy with high practicability and reliability.
小型混凝土砌块作为粘土砖的主要替代产品,是一种节土、节能、实用、可靠的新型墙体材料。
6) Block
[英][blɔk] [美][blɑk]
砌块
1.
A Research on the Modificaetion & Acttivaion of Inferior Fly Ash and the Block with High Strength Fly Ash;
劣质粉煤灰的改性激活及高强度粉煤灰砌块的研究
2.
Some points for attention about the facture and use of small-sized fly ash hollow block;
粉煤灰小型空心砌块制作和使用中应注意的问题
3.
Gray situation decision analysis of block-hole design;
砌块孔型设计中的灰局势决策分析
补充资料：“工”字纹绫
“工”字纹绫 宋代丝织物。1975年宁夏银川贺兰山西夏陵区出土。 这种绫的斜纹地组织上起空心工字形的几何图案花纹。经线密度44—46根/厘米，纬线密度25—27根/厘米。经丝宽度0．71毫米，纬丝宽度1．0—1．07毫米纬丝显花部分的宽度为1．57—2．00毫米。花纹是以空心线条组成的工字形图案，工字套叠合榫，线条粗细均匀，富有民族风格。下图是它的纹样示意。花纹循环较小，采用小提花束综装置就可织造。工字绫纹的组织结构。它以细经粗纬为结构特点。地部采用二上一、下经面斜纹组织，纬浮起花长达七根以上，纬纹隆起，凹凸效果分明，颇如现代的纬显高花织物。这是在传统的唐绫织法基础上发展起来的一种新颖别致的纬线显花法。在工字绫表面还残留敷彩或印金粉的痕迹，这在花纹上还曾印制金粉图案，为此色彩更斑斓绚丽。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条