1) heat pipe exchanger
热管换热
1.
It is indicated that heat pipe exchanger technically suit buildings energy conservation by investigaing the characteristics of energy flux in buildings.
考察建筑能流特征,热管换热技术在建筑热回收及节能中具有较好的技术适用性;对暖通空调、太阳能利用、地热能利用、低品位废热利用等热管节能的途径和形式作了系统分析,为实际工程应用提供方法论指导。
2.
Technical applicability of heat pipe exchangers for energy saving under the condition of near room-temperature is analyzed with different characteristics compared to industrial energy saving.
本文分析了热管换热技术在近室温工况条件下节能应用的技术适用性及其与工业应用的条件差异;对热管换热器结构形式、材料选择、最佳充液率等参数的确定以及通风空调节能、太阳能利用、地热能利用、低品位废热利用、热管供热系统等工程应用途径和形式、设计方法和原则等一般性工程问题作了系统分析,为实际工程应用和设计提供参考。
2) heat pipe exchanger
热管换热器
1.
Nomographic method for design and calculation of heat pipe exchanger;
热管换热器设计计算的线算图法
2.
Application of gas-gas heat pipe exchanger in recovering waste heat from powers tation;
气-气热管换热器在电站余热回收中的应用
3.
This text introduced the work principle,function characteristics and the superiority compared of other exchanger of heat pipe exchanger.
热管换热器是一种高效的换热装置。
3) heat pipe heat exchanger
热管换热器
1.
Optimum design of high temperature heat pipe heat exchanger;
高温热管换热器优化设计
2.
Optimum design for heat pipe heat exchanger in air-conditioning ventilation system;
空调排风能量回收用热管换热器的优化设计
3.
Numerical simulation and experimental study of miniature heat pipe heat exchanger in enclosed space;
封闭空间内小型热管换热器模拟与实验研究
4) exchange tube
换热管
1.
The key procedure of cladding of tubesheet,drilling,butt joint of exchange tubes and heat treatment during the process of manufacture were described,as well as the control of difficulty points in fabrication.
通过废热锅炉的研制,阐述了制造过程中的管板堆焊、钻孔、换热管对接、热处理等关键工序等制造难点的控制。
2.
Only after one year (actuary service period: 8 months) of use, the leakage occurred in the exchange tube of two coolers which were in a plant oil-compress system.
某厂油压机系统的两台油冷却器 ,在投入使用后不到一年的时间里 (实际使用 8个月 ) ,发现换热管有泄漏现象。
3.
This paper introduces the application and main function of programmable controller in a hydraulic system of exchange tube forming machine.
本文介绍了ＰＬＣ在换热管成形机液压系统中的应用情况及结构特点，给出ＰＬＣ控制系统硬件和软件的设计方案。
5) heat exchanger tube
换热管
1.
A simulation calculation of rotation speed and pressure drawdown of micro-hydraulic turbine in a heat exchanger tube;
换热管内微型液轮机转速和压降的模拟计算
2.
Scale prevention with flow induced vibration in heat exchanger tubes of different materials;
不同材质换热管内流体诱导振动阻垢技术研究
3.
The connection structure between a heat exchanger tube and a tube plate works great effects on the service life of the heat exchanger,and the rational selection of the connection structure in line with the technical conditions is an important link during the heat exchanger design.
换热管与管板的连接结构对换热器的寿命有很大的影响,根据工况合理选择连接结构是换热设备设计中的重要环节。
6) 1Cr18Ni9Ti heat exchange pipe
1Cr18Ni9Ti换热管
补充资料：蓄热式换热
分子式：
CAS号：
性质：工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时，根据气体的温度高于或低于填充物的温度，可将热量传给填充物或从填充物吸取热量。常用于冶金工业，也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。
CAS号：
性质：工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时，根据气体的温度高于或低于填充物的温度，可将热量传给填充物或从填充物吸取热量。常用于冶金工业，也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条