1) pulsed power source
脉冲功率激励源
1.
Design of a pulsed power source in the low field nuclear magnet resonance (NMR) system with the advantages of practicality, reliability, economy and simplicity is proposed in this paper.
本文提出了一种实用可靠、经济简单的低场核磁共振系统的脉冲功率激励源设计方案。
2) pulse
脉冲
1.
Research on sterilization of E.coli by pulsed light;
脉冲强光对大肠杆菌的杀菌实验研究
2.
Waveform control strategy in double wire pulsed metal inert-gas welding based on DSP;
基于DSP的双丝脉冲MIG焊波控策略的研究
3.
Pulse-anodization Treatment and Evaluation of Corrosion Resistance for AZ91D Magnesium Alloy;
AZ91D镁合金脉冲阳极氧化处理及腐蚀性能评价
3) impulse
脉冲
1.
Analysis of the impulse laser welding technology in vacuum environment;
真空环境脉冲激光焊接工艺分析
2.
Numerical simulation of inducing large eddies in boundary layer through local impulse at the wall;
平板边界层壁面局部脉冲激发大涡结构起因的数值模拟
3.
Oscillatory and asymptotic behaviors of high-order nonlinear ordinary differential equation with impulses;
带脉冲高阶非线性微分方程解的振动性和渐近性
4) pulsed
脉冲
1.
Comparison of Doppler tissue imaging with pulsed-wave Doppler in evaluation of diastolic function in hypertension patients;
多普勒组织成像与脉冲多普勒方法对比评价高血压患者舒张功能
2.
Dissynchrony on left ventricular evaluated by pulsed wave Doppler tissue imaging in patients with acute myocardial infarction;
脉冲多普勒组织成像评价急性心肌梗死后左室舒缩协调性
5) impulsive
脉冲
1.
Positive periodic solution of a time-delay predator-prey system with impulsive stocking;
具有脉冲放养的周期时滞捕食系统的正周期解
2.
Periodic solutions for impulsive periodic delayed neural networks;
脉冲时滞神经网络的周期解
3.
Oscillation of Solutions of Systems of Nonlinear Impulsive Neutral Delay Parabolic Equations;
非线性脉冲中立型时滞抛物方程组解的振动性
6) impulses
脉冲
1.
Oscillation for model of discrete red blood cells with impulses;
具有脉冲的离散的红血球补充模型解的振动性
2.
Oscillation of Higher Order Nonlinear Functional Differential Equation with Impulses;
高阶非线性脉冲泛函微分方程的振动性
3.
Unbounded Solutions of Boundary Value Problems on the Half-Line with Countable Impulses;
半直线上具有可数多个脉冲点的边值问题的无界解
参考词条
补充资料:高功率脉冲技术
| 高功率脉冲技术 high power impulse technique 研究高电压、大电流、高功率短脉冲的产生和应用的技术。最初是应材料响应实验、闪光X射线照相及模拟核武器效应的需要而出现的。1962年英国的J.C.马丁成功地将已有的Marx发生器与传输线技术结合起来,产生了持续时间短达纳秒级的高功率脉冲,从而开辟了这一崭新的领域。随之,高技术领域如受控热核聚变研究、高功率粒子束、大功率激光、定向束能武器、电磁轨道炮等的研制都对高功率脉冲技术的发展提出了新的要求,使高功率脉冲技术成为80年代极为活跃的研究领域之一。高功率脉冲系统的主要参量有:脉冲能量(千焦~吉焦),脉冲功率(吉瓦~太瓦),脉冲电流(千安~兆安),脉冲宽度(微秒~纳秒)和脉冲电压。高功率脉冲系统的工作原理是,先将从低功率能源中获得的能量储存起来,然后将这些能量经高功率脉冲发生器转变成高功率脉冲,并传给负载。由一定的能量所转换成的脉冲持续时间愈短,在负载上得到的功率愈高。能源所提供的可以是电能、磁能、化学能或其他形式的能。高功率脉冲发生器由Marx发生器(或电容器组)和脉冲形成回路共同组成,又称脉冲发电机。80年代建在英国的欧洲联合环(托卡马克装置),由脉冲发电机提供脉冲大电流。脉冲发电机由两台各带有9米直径、重量为775吨的大飞轮的发电机组成。发电机由8.8兆瓦的电动机驱动,大飞轮用来储存准备提供产生大功率脉冲的能量。每隔10分钟脉冲发电机可以产生一个持续25秒左右的500万安大电流脉冲。 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。