1) biaxial bending
双向压弯
1.
Interactive diagrams of concrete-filled square steel tubular short column under biaxial bending and longitudinal load;
3种典型加载路径下的双向压弯方钢管混凝土短柱相关曲线
2.
In this thesis, the FEM model of biaxial bending of tapered I-section beam-columns with slender web which consider the interactive buckling is built for the geometrically nonlinear and materially nonlinear analysis.
本文利用有限元程序ANSYS,考虑材料非线性,几何非线性,腹板局部屈曲与构件整体屈曲的相关作用,初始几何缺陷及残余应力,建立了能较好反映实际情况的薄腹工形变截面双向压弯构件的有限元模型。
3.
Beams and columns of a framework are always in the axial force and biaxial bending state, although the in plane design formula had led to many successful designs, it can t describe the true state of spatial structures.
框架结构中的梁柱经常处于双向压弯的状态,虽然以前平面内的压弯设计公式导致了很多成功的设计,但它不一定能够描述空间结构真实的受力状态。
2) axial compression
双向压弯
1.
C short columns with "Z" shaped section subjected to axial compression and cyclically biaxial bending, this paper reveals the failure pattern and general regularity for load-bearing capacity of the columns.
通过对9根Z形截面柱在双向偏心集中力作用下的试验研究,揭示了Z形截面双向压弯柱的破坏形态及正截面承载力的一般规律。
2.
short columns with " +", shaped cross section subjected to axial compression and cyclically biaxial bending, this paper reveals the failure pattern and general regularity for load-bearing capacity of the columns.
对８根十字形截面钢筋砼构件在轴向力及双向弯矩共同作用下的反复加载试验研究，揭示了十字形截面钢筋砼双向压弯构件的破坏形态及正截面承载力的一般规律。
3) biaxial bending and compression
双向弯压
1.
Here arbitrary cross-sections are analyzed with different concrete constitutive laws under the action of biaxial bending and compression.
为研究不同混凝土本构关系对截面分析的影响,分别用我国混凝土结构设计规范、CEB规范以及美国学者建议的混凝土本构关系,对钢筋混凝土双向弯压截面进行分析比较。
4) bi-axial bending moment
双向压弯构件
1.
Cross-sectional strength of high-strength concrete-filled RHS steel tubes subjected to axial compression and bi-axial bending moment;
矩形钢管高强混凝土双向压弯构件截面强度
5) double direction constrictive bending combinatory component
双向压弯组合式构件
6) biaxial bending
双向受弯
1.
Design technique of steel beam under biaxial bending;
双向受弯型钢梁设计技巧
2.
Calculation of the shear capacity of reinforced concrete beams under biaxial bending
双向受弯钢筋混凝土梁受剪承载力计算
3.
members with web reinforcement subject to biaxial concentrated load,the method of equal effective shuttle-shape section was adopted,the restrained beams under biaxial bending is turning into the restrained beams under axial bending.
在13根集中荷载作用下钢筋砼双向受弯约束梁斜截面抗剪试验研究的基础上,采用等效梭形截面法,将双向受弯约束梁转化为单向受弯约束梁,并推出集中荷载作用下钢筋混凝土双向受弯约束梁斜截面抗剪强度的计算方法。
补充资料：长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条