上限为三法则,Rule of Three,音标,读音,翻译,英文例句,英语词典

您的位置：首页 -> 词典 -> 上限为三法则

1) Rule of Three 点击朗读

上限为三法则

Preconditions About Rule of Three; 点击朗读

关于“上限为三法则”(Rule of Three)的形成条件

2) artificial permafrost table 点击朗读

人为上限

Based on the experimental data of Qinghai-Tibet railway s experimentation project,the paper analyzes the character of yard-and-station roadbed s temperature field and artificial permafrost table,also discusses the rule of the process of embankment s freezing and thaw.

站场路基的宽度为单线普通路基宽度的两倍 ,结合青藏铁路试验工程观测的数据 ,分析了冻土区站场路基地温场以及多年冻土人为上限的特征 ,探讨了路基的冻结和融化过程的规律 ,阐述了多年冻土区路基的稳定性问题。

3) behavior approach 点击朗读

行为法则

4) upper-bound method 点击朗读

上限法

Analysis of process parameter of open-die cold extrusion with upper-bound method 点击朗读

开式冷挤压工艺参数的上限法分析与实验研究

An extrusion flow model of aluminum alloy cylinder is built by the upper-bound method,and the kinematically admissible velocity field,the strain rate field and the upper-bound deformation power are deduced with five different die containers.

应用上限法建立铝合金圆棒料挤压成形的流动模型,推导了坯料在5种不同型腔曲线下变形时的动可容速度场、应变速率场及上限功率的表达式。

Kinematically admissible velocity fields based on the upper-bound method for analyzing metal-flowing were set up.

采用上限法,在分析金属流动的基础上,建立了挤压坯料各区域的动可容速度场,计算了零件的挤压上限功率及挤压各通道的高度,并通过实验进行了验证。

更多例句>>

5) upper bound method 点击朗读

上限法

Appliancation of plastic limit analysis upper bound method on the calculation of safety factor on slope

塑性极限分析上限法在边坡安全系数求解中的应用

Application of upper bound method to stability analysis of reinforcement 点击朗读

上限法在加筋土结构物稳定性分析中的应用

Based on upper bound method in limit analysis,the process of coating extrusion has been derived in detail and the costing gap is introduced into the final expression of power.

本文采用上限法对包覆挤压过程建立了数值模型,从能量的角度对包覆挤压过程进行了数值计算,将包覆间隙作为一变量引入功的表达式中,并通过数值计算软件给出了数值解,得出包覆间隙的最佳理论值。

更多例句>>

6) upper limit method 点击朗读

上限法

In a cylinderical coordinate,force of bar extrusion of different curved dies is studied theoretically,and the upper limit method is used to deduce the formula for caulcation.

在柱坐标系下,采用上限法推导了不同型线凹模棒材挤压力理论计算公式;并计算了锥模棒材挤压力,其计算结果接近实测值,相对误差平均值为2。

This paper deduces a multi-variation formula by using the energy principle and adopting upper limit method.

本文从一般能量原理出发 ,采用上限法推导出一个多变量公式 ,利用该公式可求解电机功率、张力系数、轧辊转速、出口钢管壁厚、孔型椭圆度等参数 ,并且从理论上计算出电机负功率的存

By using the finite element method and linear program,the upper limit method can evaluate the bearing capacity and the safety factor of soil slope.

借助有限单元法和线性规划,运用塑性极限分析的上限法可求解土坡的极限承载力和安全系数,同时分析了该法的困难所在。

更多例句>>

补充资料：苯并三唑-1-三(三甲氨基)-三氟磷酸酯

CAS: 56602-33-6
分子式: C12H22F6N6OP2
分子质量: 442.28
熔点: 136-140℃
中文名称: 苯并三唑-1-三(三甲氨基)-三氟磷酸酯

英文名称: (1-hydroxy-1h-benzotriazolato-o)tris(n-methylmethanaminato)-phosphorus(1++
benzotriazol-1-yloxytris(dimethylamino)-phosphonium hexafluorophosphate
benzotriazol-1-yl-oxytris(dimethylamino)phosphonium hexa-fluorophosphate(bop)
benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

上限法极限分析极限分析上限法广义上限法上限元法(UBET)

上限元法上界限法上限解法门限准则法主权上限原则限界上下文规则

说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
	您的位置：首页 -> 词典 -> 上限为三法则 1) Rule of Three 上限为三法则 1. Preconditions About Rule of Three; 关于“上限为三法则”(Rule of Three)的形成条件 2) artificial permafrost table 人为上限 1. Based on the experimental data of Qinghai-Tibet railway s experimentation project,the paper analyzes the character of yard-and-station roadbed s temperature field and artificial permafrost table,also discusses the rule of the process of embankment s freezing and thaw. 站场路基的宽度为单线普通路基宽度的两倍 ,结合青藏铁路试验工程观测的数据 ,分析了冻土区站场路基地温场以及多年冻土人为上限的特征 ,探讨了路基的冻结和融化过程的规律 ,阐述了多年冻土区路基的稳定性问题。 3) behavior approach 行为法则 4) upper-bound method 上限法 1. Analysis of process parameter of open-die cold extrusion with upper-bound method 开式冷挤压工艺参数的上限法分析与实验研究 2. An extrusion flow model of aluminum alloy cylinder is built by the upper-bound method,and the kinematically admissible velocity field,the strain rate field and the upper-bound deformation power are deduced with five different die containers. 应用上限法建立铝合金圆棒料挤压成形的流动模型,推导了坯料在5种不同型腔曲线下变形时的动可容速度场、应变速率场及上限功率的表达式。 3. Kinematically admissible velocity fields based on the upper-bound method for analyzing metal-flowing were set up. 采用上限法,在分析金属流动的基础上,建立了挤压坯料各区域的动可容速度场,计算了零件的挤压上限功率及挤压各通道的高度,并通过实验进行了验证。更多例句>> 5) upper bound method 上限法 1. Appliancation of plastic limit analysis upper bound method on the calculation of safety factor on slope 塑性极限分析上限法在边坡安全系数求解中的应用 2. Application of upper bound method to stability analysis of reinforcement 上限法在加筋土结构物稳定性分析中的应用 3. Based on upper bound method in limit analysis,the process of coating extrusion has been derived in detail and the costing gap is introduced into the final expression of power. 本文采用上限法对包覆挤压过程建立了数值模型,从能量的角度对包覆挤压过程进行了数值计算,将包覆间隙作为一变量引入功的表达式中,并通过数值计算软件给出了数值解,得出包覆间隙的最佳理论值。更多例句>> 6) upper limit method 上限法 1. In a cylinderical coordinate,force of bar extrusion of different curved dies is studied theoretically,and the upper limit method is used to deduce the formula for caulcation. 在柱坐标系下,采用上限法推导了不同型线凹模棒材挤压力理论计算公式;并计算了锥模棒材挤压力,其计算结果接近实测值,相对误差平均值为2。 2. This paper deduces a multi-variation formula by using the energy principle and adopting upper limit method. 本文从一般能量原理出发 ,采用上限法推导出一个多变量公式 ,利用该公式可求解电机功率、张力系数、轧辊转速、出口钢管壁厚、孔型椭圆度等参数 ,并且从理论上计算出电机负功率的存 3. By using the finite element method and linear program,the upper limit method can evaluate the bearing capacity and the safety factor of soil slope. 借助有限单元法和线性规划,运用塑性极限分析的上限法可求解土坡的极限承载力和安全系数,同时分析了该法的困难所在。更多例句>> 补充资料：苯并三唑-1-三(三甲氨基)-三氟磷酸酯 CAS: 56602-33-6 分子式: C12H22F6N6OP2 分子质量: 442.28 熔点: 136-140℃ 中文名称: 苯并三唑-1-三(三甲氨基)-三氟磷酸酯英文名称: (1-hydroxy-1h-benzotriazolato-o)tris(n-methylmethanaminato)-phosphorus(1++ benzotriazol-1-yloxytris(dimethylamino)-phosphonium hexafluorophosphate benzotriazol-1-yl-oxytris(dimethylamino)phosphonium hexa-fluorophosphate(bop) benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate 说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条上限法极限分析极限分析上限法广义上限法上限元法(UBET)

©2011 dictall.com