1) settling tank
沉析槽
1.
This paper introduces the modification of feed methods of settling tank and centrifuge,screw conveyer,and drying column section in the process of vinyl chloride polymerization.
介绍对聚氯乙烯聚合中沉析槽、离心机进料方式、螺旋输送器及干燥塔段的改进 ,改进后树脂的质量有所提高、消耗降低、离心机运转正常 ,操作环境大大改
2.
It was indicated that a 70 m3 PVC mixing tank could be modified to a settling tank through installing three reinforcement rings.
指出在70m3 PVC混料槽筒体上设置3道加强圈可将其改造成沉析槽,通过计算确定了加强圈的规格及改造后设备的稳定性。
2) bottom aggradations
槽底沉积
4) thickener
[英]['θikənə] [美]['θɪkənɚ]
沉降槽
1.
Determining the power of sludge raking device of thickener in the production of alumina;
氧化铝生产中沉降槽刮泥功率的确定
2.
Utilized "Separating thickener and plate and frame filter" recoverved mother liquan floating substance, it can decrease floating substance to harm eveporator and cycle in flowsheet, and increasting alumina recovery ratio.
利用"分离沉降槽+板框压滤机"回收烧结法母液浮游物,可以减少浮游物对蒸发器的危害及在流程中循环,提高氧化铝总回收率。
5) sagging method
槽沉法
1.
According to the theory which the transparent glass micro-sphere can be obtained after freezing liquid under the interfacial force,the sagging method was firstly used to fabricate ball lenses.
根据在表面张力的作用下液滴冷凝后得到透明玻璃微球的理论,首次使用槽沉法来制备球透镜试验结果表明:该光学玻璃和球透镜的折射率分别为1。
2.
According to the developmental trend of coupling devices in optical communication, a new style optical glass is developed and ball lenses can be fabricated by use of sagging method depending on liquid interfacial force.
根据国内外光通信耦合器件发展的趋势,研制了一种新型玻璃,依靠液体表面张力的作用,首次采用槽沉法来制备球透镜,得到了理想的效果。
6) setting tank
沉降槽
1.
The measures that decrease weld deformation of setting tank base-plate;
减少沉降槽底板焊接变形的措施
补充资料：沉析纤维
分子式：
CAS号：
性质：又称沉析纤维，指有纤维状结构的合成聚合物。品种有芳酰胺、聚酯、聚己内酰胺和聚丙烯腈等。其形态如枝梢，长约1mm，具有黏合和抱合性，调成浆液后能黏合化纤等，制成合成纸或薄型湿法非织造物等。制法是将聚合物稀溶液等在强烈搅拌下注入大量凝固剂，或将其细流注入强搅拌的凝固液中，沉析成纤条体。用途作合成纸和电绝缘纸的粘接料等。
CAS号：
性质：又称沉析纤维，指有纤维状结构的合成聚合物。品种有芳酰胺、聚酯、聚己内酰胺和聚丙烯腈等。其形态如枝梢，长约1mm，具有黏合和抱合性，调成浆液后能黏合化纤等，制成合成纸或薄型湿法非织造物等。制法是将聚合物稀溶液等在强烈搅拌下注入大量凝固剂，或将其细流注入强搅拌的凝固液中，沉析成纤条体。用途作合成纸和电绝缘纸的粘接料等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条