1) TEM cell
TEM小室
1.
In order to measure the waveform and amplitude of EMP accurately, the sensors need to be calibrated under the standard fields in the TEM or GTEM cell.
主要研究电磁脉冲传感器的场标定问题,建立了由TEM小室、标准场强计及其他附属设备组成的电磁脉冲传感器标准场标定系统,阐述了幅频响应、时域脉冲响应、线性度、动态范围等参数的标定方法。
2.
This paper presents a TEM cell model for calculating the magnetic field.
针对同轴TEM小室标准磁场模拟腔体,建立了计算其内部磁场与输出端电流关系的物理模型。
2) discal TEM cell
盘式TEM小室
1.
In order to obtain the precise response time and sensitivity of rogowski coils,a discal TEM cell for calibrating rogowski coils is researched and manufactured.
为获得精确的罗可夫斯基线圈的响应时间和灵敏度,研制了标定罗可夫斯基线圈的盘式TEM小室。
3) TEM cell
TEM室
4) TEM cell
TEM传输室
1.
Numerical analysis of characteristic impedance of TEM cell with multilayered dielectric media brace bar;
TEM传输室多层介质支撑特性阻抗的数值分析
2.
The high order mode cutoff frequencies and resonant frequencies of TEM cell were analyzed using finite-element method (FEM).
采用三维有限元法分析了TEM传输室的高次模截止频率和谐振频率。
3.
The effects on the characteristic impedance and field distribution of TEM cell c aused by perfectly conducting EUT (Equipment Under Test) were analyzed, and the field strength the EUT exposed to during the sensitivity test was evaluated.
采用边界元法分析了不同尺寸的良导体受试设备 (EquipmentUnderTest ,EUT)对TEM传输室特性阻抗和场分布的影响 ,并估算了敏感度测试中EUT所承受暴露场强的大小。
5) Tripe-TEM cell
Tripe-TEM传输室
6) transmission electron microscopy
TEM
1.
Extensive dislocation structure was observed by transmission electron microscopy(TEM) in polycrystalline alumina ceramic sintered under a short-time high temperature 1 800 ℃ and pressure 100 MPa.
利用TEM对经过短时间高温1 800℃、高压100 MPa处理后的氧化铝陶瓷位错形貌进行了观察分析。
2.
The surface morphology, composition and structure character of the Fe-N-O thin films were studied by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM).
通过扫描电子显微镜(SEM)、光电子能谱(XPS)和透射电子显微镜(TEM)等先进实验分析手段对二极溅射沉积Fe N O薄膜的形貌与结构进行了分析。
3.
The structure, growth feature and graphitizability of typical rough laminar (RL) and smooth laminar (SL) pyrolitic carbons in carbon/carbon composites were studied by using transmission electron microscopy and laser Raman spectroscopy.
采用TEM表征结构、喇曼光谱表征石墨化度,研究了C/C复合材料中典型粗糙层(RL)和光滑层(SL)结构热解炭生长特征及其与可石墨化性之间的对应关系。
补充资料：室人
1.泛指家中的人。 2.主人。 3.古时称妻妾。 4.古称丈夫家中的平辈妇女。 5.宋代命妇的封号之一，后改为"宜人"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条