说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 动静压
1)  dynamic & static pressure
动静压
1.
The design of structure and software of dynamic & static pressure simulator based on the half-figure exploitation environment of virtual instrumentation LabWindows/CVI6.
0的基础上 ,给出了动静压模拟器结构设计和软件设计要点。
2)  static-kinetic pressure
静动压
1.
he fundamental measures for oil leakage prevention of main--shaft system under static--kinetic pressure are explained, and based on the experiences in designing vertical main--shaft system subjected to static--kinetic pressure, the author proposed a new device in'preventing oil leakage of main--shaft.
阐述了静动压主轴系统中防止主轴油泄漏的基本措施,并在此基础上根据设计立式静动压主轴系统的经验,提出了一种防止主轴油泄漏的新结构。
3)  hydrostatic driving
静压驱动
1.
A cannon hydrostatic driving system is described.
将静压驱动应用于火炮的驱动系统中,利用电液比例控制技术,实现火炮的自行走功能。
4)  static pressure vibration
静压振动
1.
Depending on different formations, the static pressure vibration method was used to sink casings for hole wall protection and the DTH drilling method was employed.
根据不同地层分别采用静压振动下套管护壁及潜孔锤钻进方法,设计了风路系统,改进了套管连接方法,并采取了科学的管理方法,取得了较好的效果。
5)  hydrostatic transmission
静压传动
1.
Research and application of forklift truck with hydrostatic transmission system
叉车静压传动系统研究与应用
2.
The structure and specialty of hydrostatic transmission for farm machinery are introduced.
介绍了典型静压传动装置的构成、特性和传动方案,并以联合收获机为例说明了其应用。
3.
The analysis and research of hydrostatic transmission testing method have been put forward in this paper.
为了解决传统液压测试系统中操作人员工作强度大、测试效率低、环境差、测量精度差等问题和为了满足静压传动实验室对测试系统低成本、多功能的要求。
6)  dynamic-static pressure difference
动静压差
1.
The specific requirements include generating -10KPa to 100KPa dynamic-static pressure difference with 4MPa hydraulic pressure, keeping the precision in the scope of ±0.
为完成该计程仪内场中修调试,需研制一套测试系统对液压进行精确控制,要求在最大产生4MPa液压力的同时能够产生-10 KPa至100KPa范围内的动静压差,精度为±0。
补充资料:冲击波超压与动压

[解释]:  核爆炸产生的高温、高压火球膨胀,在周围介质中形成连续向外传播的压力脉冲(或冲击波),冲击波阵面传播到空间某点时,超过周围环境大器的压力称超压;空气粒子高速随波阵面运动产生的冲击压力称动压。超压和动压都以帕斯卡(Pa)为主单位。超压随时间的变化取决于爆炸威力、距爆点的距离和爆心周围的介质情况。特定地点的峰值超压一般出现在冲击波阵面到达该点的瞬间,超压在该点的持续时间称为正压作用时间。尔后,该点的压力下降到低于周围压力,称为负压,再逐渐回升到周围压力值。对人员的直接冲击伤,超压为20—29千帕可引器轻度伤;29—59千帕可导致中度伤;59—98千帕可造成重度伤;大于98千帕可造成极重度伤。动压为10—20千帕可造成中度伤;20—39千帕可造成重度伤;大于39千帕可造成极重度伤。动压的推动、抛掷和超压的挤压会造成物体变形和毁坏。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条