1) epoxy and sand transfer layer
环氧砂过渡层
1.
The results indicate that epoxy and sand transfer layer can largely improve the bond strength of new-old concrete, especially the combination of using stone grains and cement mortar is the best.
结果表明,环氧砂过渡层可明显改善新老混凝土之间的粘结劈拉强度,尤以米粒石的情况为好,同时,对环氧砂过渡层改善粘结性能的机理进行了探讨,并把该方法应用于某水利工程的修补加固中。
2) medium oxidative horizon
过渡氧化层
3) epoxy mortar coating
环氧砂浆涂层
1.
The interaction and adhesion failure mechanism of the interface between an epoxy mortar coating and a concrete base are also discussed in the paper.
环氧砂浆涂层在水利水电工程中的应用已有 40年历史。
4) Ti interlayer
钛过渡层
1.
Effect of Ti interlayer on thermal residual stresses of CVD diamond films;
钛过渡层对CVD金刚石膜热残余应力的影响
2.
Thermal stress distribution in film/substrate systems were calculated separately,one with Mo,W and Ni substrates and the other with Mo substrates with Ti interlayer.
分别计算了在常用金属材料钼、钨、镍作衬底和用镀有钛过渡层的钼作衬底的情况下,膜/衬底间的热应力分布情况。
3.
A type of composite substrate was explored to solve the problem of crack in the deposition of diamond films,that is,Mo substrates with Ti interlayer.
为了解决金刚石膜脱膜开裂的问题,尝试了一种复合衬底,即镀有钛过渡层的钼衬底。
5) Transition layer
过渡层
1.
Research of synthesizing PDC by using various transition layer materials;
采用过渡层合成金刚石复合片研究
2.
Transition Layer of Copper-cladding Aluminum in Continuous Casting;
连铸铜包铝复合棒坯过渡层的研究
3.
Interface structure and mechanical properties of FeNi alloy transition layer of composite pipes prepared by SHS;
SHS复合管FeNi合金过渡层接合界面结构及力学性能
6) transitional layer
过渡层
1.
Reflectance signatures of transitional layer and its tuning effects to the amplitudes of pulsating waves.;
过渡层反射特征及脉冲波的振幅调谐现象
2.
With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding.
利用中间过渡层的作用 ,在镁基金属复合材料上激光熔覆了不锈钢合金层 ,熔覆层与基体为冶金结合。
3.
Measures on resisting earthquake structure were proposed in setting of transitional layer,construction columns,earthquake resisting walls,forms and structure of earthquake resisting walls,and the design of gird beam of reinforced.
根据《建筑抗震设计规范》(GBJ11-89)中有关底层框架—抗震墙砖房的规定 ,从工程实用的角度出发 ,探讨了底部两层框架—抗震墙砖房的设计要点 ,并从过渡层楼板、构造柱的设置、抗震墙的设置、结构形式、抗震墙的构造、钢筋混凝土圈梁、过渡层外纵墙、上部承重砖墙等的构造设计方面提出了抗震构造措施。
补充资料：双(2,3-环氧环戊基)醚玻璃布层合板
分子式：
CAS号：
性质：以双(2,3-环氧环戊基)醚为基料的层合板。马丁耐热270℃。拉伸强度371MPa。弯曲强度487MPa。冲击强度125kJ／m2。体积电阻率l.18×1015Ω·cm。将双(2,3-环氧环戊基)醚与固化剂等制成胶液或B阶树脂后,充分浸渍玻璃布,再叠层并层合即得。主要用作航空航天器材、电子元件和体育器材等。
CAS号：
性质：以双(2,3-环氧环戊基)醚为基料的层合板。马丁耐热270℃。拉伸强度371MPa。弯曲强度487MPa。冲击强度125kJ／m2。体积电阻率l.18×1015Ω·cm。将双(2,3-环氧环戊基)醚与固化剂等制成胶液或B阶树脂后,充分浸渍玻璃布,再叠层并层合即得。主要用作航空航天器材、电子元件和体育器材等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条