1) digital gun control system
数字炮控系统
2) digital gun control servo system
数字炮控伺服系统
3) gun control system
炮控系统
1.
Aimed at the problems of nonlinear disturbances and varieties of system parameters,the capability of gun control system was analyzed and the math model was built.
针对坦克炮控系统非线性扰动和系统参数非线性漂移等问题,在分析炮控系统性能并建立其数学模型的基础上,提出了转速环双环复合自适应控制策略,设计了负载扰动观测器和单神经元自适应PID控制器。
2.
In the approval test of tank gun control system(GCS),according to the requirements of conventional ordnance approval test,the required quantity and form of force should be applied on the tank gun barrel.
通过测量受力后火炮与炮塔的运动参量,计算出炮控系统的性能参数,为坦克炮控系统能否定型提供依据。
3.
The influence of low velocity properties of gun control system caused by friction nonlinearity is analyzed based on the friction moment of the stribeck model.
从摩擦力矩的Stribeck模型入手,分析了摩擦非线性对炮控系统低速性能的影响。
4) digital monitoring system
数字监控系统
1.
This paper introduces design of the digital monitoring system used by Majiliang Mode-assembly Coal Preparation Plant.
介绍了马脊梁选煤厂采用的数字监控系统的设计原理、系统构成及应用效果。
2.
Description was made to the trend of intellectualization of low-voltage switchgear assemblies both at home and abroad, intro-ducing the basic configuration of digital monitoring system, combined with the present situation of low-voltage switchgear assemblies in China, proposal is made to the application of digital monitoring system.
阐述了国内外低压成套开关设备智能化走势,介绍了数字监控系统的基本构成,结合国内低压成套开关设备现状,对数字监控系统的应用提出建议。
3.
The intelligent development trend of low voltage switchgear assembly at home and abroad is expounded in detail, as well as the basic structure of the digital monitoring system is introduced.
对国内外低压成套开关设备“智能化”走势作了详细的阐述,介绍了数字监控系统的基本构成,并结合国内低压成套开关设备现状,对数字监控系统的应用提出建议。
5) digital control system
数字控制系统
1.
Intelligent digital control system for CO_2 short circuiting welding;
智能短路过渡二氧化碳气体保护电弧焊数字控制系统
2.
Progress and trend of digital control systems with multiple sampling rate;
多采样率数字控制系统的进展与走向
3.
Digital Control System of Perm anent Magnet Square Wave Brushless DC Motor Based on DSP;
基于DSP的永磁方波无刷直流电动机数字控制系统
6) digital control system
数字化控制系统
1.
Design of a pure digital control system for a new type of geared motor;
新型啮合式电动机全数字化控制系统设计
2.
This paper puts forward a digital control system for intelligent high speed can body resistance welding machine based on a homemade motion controller marketed as MCT8000F8,and its structure and working principle,hardware interface,motor control method and math model of servomotors ganged relations are also introduced.
提出了以国产MCT80 0 0F8运动控制器为核心的智能高速罐身电阻焊机数字化控制系统 ,并介绍了系统的组成、工作原理、硬件接口、电机控制方法以及伺服电机的运动关系数学模型 。
3.
However, the process of data collection and digital control system brings time delay more or less.
有源电力滤波器作为动态谐波治理装置对系统实时性的要求很高,其数字化控制系统中存在的延时将不可避免地对系统整体性能产生消极影响。
补充资料：“孔雀石”便携式自动火控系统
俄罗斯新研制的“孔雀石”便携式自动火控系统可大幅度增加对小型目标的瞄准距离，例如，对坦克在白天的瞄准距离为5-7千米，在夜间时的瞄准距离为4千米。此外，该系统对较大地面目标和海上目标的瞄准距离可达15千米。
“孔雀石”系统的重量为30.5千克(在配备热成像仪时的重量为42千克)，可由三人携行。其组成部件中除了激光目标指示与测距仪外，还包括热成像瞄准具、电子操控台、卫星导航信号接受机和数字化电台等。
借助俄罗斯“格洛纳斯”系统或美国gps系统提供的导航信号，“孔雀石”可自动确定目标的坐标并提供必要的射击诸元，使己方炮兵准备火力打击的时间缩短90%以上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条