说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 等温结晶形态
1)  Isothermal Crystalline State
等温结晶形态
2)  isothermal crystallization
等温结晶
1.
The Monte Carlo method simulating the effect of radii on isothermal crystallization of PEG fibers;
计算机模拟纤维半径对PEG等温结晶动力学参数的影响
2.
Rheological behavior of isothermal crystallization for high-density polyethylene;
高密度聚乙烯等温结晶的流变行为
3.
Simulation experiment for isothermal crystallization of polymers;
聚合物等温结晶过程的模拟实验
3)  static isothermal crystallization rate
静态等温结晶速度
4)  non-isothermal crystallization
非等温结晶
1.
Effect of styrene-ethylene/butylene-styrene elastomer grafted with maleic anhydride on morphology and non-isothermal crystallization behavior of polystyrene/polyamide 6 blends;
SEBS-g-MA对PS/PA6的相形态及非等温结晶行为的影响
2.
Research on non-isothermal crystallization kinetics of poly(ethylene terephthalate);
聚对苯二甲酸乙二酯非等温结晶过程研究
3.
Non-isothermal Crystallization Kinetics of PP-g-EMA;
聚丙烯固相接枝甲基丙烯酸乙酯的非等温结晶行为
5)  nonisothermal crystallization
非等温结晶
1.
Monte Carlo simulation of nonisothermal crystallization of polymers;
高聚物非等温结晶过程的Monte Carlo法模拟
2.
The nonisothermal crystallization behavior of the MC nylon 6/ZnO nanocomposite prepared by in situ polymerization was studied by means of differential scanning calorimetry(DSC),where a kinetic analysis was made by Jeziomy,Mo and Kissinger methods based on modified Avrami equations.
采用差示扫描量热法研究了原位聚合反应制备的MC尼龙6/纳米ZnO复合材料的非等温结晶行为,并利用修正Avrami方程的Jeziomy法、Mo法和Kissinger法对其动力学过程进行了分析。
3.
The nonisothermal crystallization behavior of metalloeene linear low density polyethylene(mLLDPE)and traditional linear low density polyethylene(LLDPE)was stud- ied by differential scanning calorimeter(DSC).
利用差示扫描量热仪(DSC)研究了茂金属线性低密度聚乙烯(mLLDPE)和传统线性低密度聚乙烯(LLDPE)的非等温结晶行为。
6)  non isothermal crystallization
非等温结晶
1.
The melt intercalation method was employed to prepare polypropylene/maleic anhydride grafted polypropylene/montmorillonite(PP/PP MA/MMT) nanocomposites and the non isothermal crystallization kinetics of the composites was investigated by means of differential scanning calorimeltry(DSC).
采用熔融插层法制备了聚丙烯 /马来酸酐接枝聚丙烯 /蒙脱土 (PP/PP MA/MMT)纳米复合材料 ,并用差示扫描量热法 (DSC)对体系的非等温结晶动力学进行了研究。
2.
The kinetics of isothermal and non isothermal crystallization of Polypropylene (PP) and PP/nanomontmorillonite composites is investigated by differential scanning calorimetry(DSC) and the data have been analyzed with Avrami equation and ZHAO Zhi ying method respectively.
采用热分析方法 ,研究了聚丙烯 /纳米蒙脱土复合材料 (PP/CLAY)的等温和非等温结晶行为 ,并分别用Avrami方程和赵志英方法[1] 对所得数据进行了分析 。
3.
The non isothermal crystallization behavior and melting characteristics of polypropylene(PP) nucleated by different nucleating agents were studied by DSC.
用 DSC研究了两种成核剂成核 PP的非等温结晶行为与熔融特性。
补充资料:电结晶形态
分子式:
CAS号:

性质: 金属电沉积层外部形貌的几何特征。它受晶体内部结构的对称性、结构基元之间的成键作用力以及晶体缺陷等因素的制约,但在很大程度上受电沉积条件的影响。有时成分和结构相同的同一品种的电沉积层,其外部形貌的几何特性可能非常不同。常见的电结晶形态有层状、脊状、棱锥状和块状;较不常见的有螺旋状、枝晶和须晶。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条