说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 地空导弹总体性能
1)  total-property of the Ground-to-Air Missile
地空导弹总体性能
2)  missile systems
导弹总体
3)  Anti-air missile
地空导弹
1.
Anti-air missile systems use fire-sheltering height and area to take the place of fire-sheltering space, and mainly quantify fire-sheltering area.
地空导弹火力掩护空域可用系统火力掩护高度和掩护面积表征,并主要从掩护面积对其量化。
2.
The effect of temperature on the anti-air missile is very grave.
温度环境对地空导弹武器装备的设备和元器件等有着严重的影响,是地空导弹武器装备使用维护中一个不可回避的问题。
4)  air to surface missile
空地导弹
1.
Aims at the problem that laser fuze take targets from the complicated background while the tactics air to surface missile do battle,brings out a method to recognize targets using laser ranging,gives out the criterion and extent of reorganization,and analyses and illuminates with simulation.
针对战术空地导弹激光引信复杂的目标背景,提出了一种利用激光测距识别目标的方法,给出了识别判据和识别区域。
2.
In this paper,a summary of precision analysis method for guide system of air to surface missile is introduced.
制导精度分析是空地导弹制导控制系统设计过程中必须考虑的关键因素之一。
5)  ground-to-air missile
地空导弹
1.
Survivability character of ground-to-air missile fire unit under the threat of EPB;
EPB威胁下的地空导弹火力单元生存性研究
2.
Application of Non-linear Regression Analysis in Establishing Price Model of Ground-to-Air Missile;
非线性回归分析在建立地空导弹价格模型中的应用
3.
JMASE-based Joint Modeling and Simulation of Ground-to-Air Missile;
基于JMASE的地空导弹联合建模与仿真
6)  air-to-ground missile
空地导弹
1.
Research on accuracy assessment for air-to-ground missile based simulation technology;
应用仿真技术的空地导弹命中精度评定
2.
Due to the difficulty to repeat fire tests of air-to-air missile and air-to-ground missile in a same launching condition,group test data are unavailable.
由于空空和空地导弹难以在相同发射条件下进行重复射击试验,因而无法得到成组试验数据。
3.
In order to evaluate weapon system operational effectiveness in general,the necessity of developing an air-to-ground missile countermine simulation system was proposed.
从武器系统作战效能评估的角度提出研发空地导弹攻防对抗仿真系统的必要性,对空地导弹攻防对抗仿真系统进行了系统分析,探讨了基于UML的仿真系统建模分析方法,给出仿真系统的仿真概念模型和具体分析实例。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条