1) cylindrical spring
圆柱弹簧
1.
There is no function of directly creating cylindrical spring in UG modeling, and it is very complex to create cylindrical spring in UG by other means.
针对UG中缺少圆柱弹簧的直接造型功能,而且在UG中生成弹簧造型过程复杂繁琐的问题,作者通过利用NURBS曲线逼近螺旋线的方法,将NURBS曲线与UG二次开发有机地结合起来,程序化地生成圆柱弹簧,实现了在UG中直接生成圆柱弹簧造型的功能。
2) cylindrical spring
圆柱形弹簧
3) cylinder helix spring
圆柱螺旋弹簧
1.
In this paper,the optimization design of cylinder helix spring was introduced and the mathematical model of cylinder helix spring was established.
介绍了圆柱螺旋弹簧的优化设计方法,建立了圆柱螺旋弹簧优化设计的数学模型,并结合实例借助于数学软件MATLAB的优化工具箱进行了寻优计算,给出了优化设计程序,得到了满足实际需要的最优化参数,这对于圆柱螺旋弹簧的设计具有理论指导意义。
2.
Immune Algorithm (IA) based on Immune principles is introduced and the application of IA in fuzzy optimum design of cylinder helix spring is discussed in this paper.
介绍了一种基于生物免疫原理的免疫算法及其在圆柱螺旋弹簧模糊优化设计中的应用。
3.
This new hybrid algorithm is used to solve the problem of shear stress verifying of a cylinder helix spring,which belongs in a typical problem of mechanical optimization design.
用该新型混合算法解决了圆柱螺旋弹簧的剪应力校核这一典型机械优化设计问题,并与传统罚函数法、混沌-Powell混合算法及标准GA进行了比较。
4) cylindrical helical spring
圆柱螺旋弹簧
1.
Characteristic research on bending elasticity of prestressed cylindrical helical spring;
预应力圆柱螺旋弹簧弯曲弹性特性研究
2.
The measurement and compensation of the hysteresis of cylindrical helical spring;
圆柱螺旋弹簧迟滞的检测和补偿
3.
This paper introduces the characters and the pressure measuring method of cylindrical helical spring, analyzes the problems of current measuring systems, sets forth the working principle of this measuring system and discusses the worktable\'s structure and the control system\'s design method.
介绍了圆柱螺旋弹簧的特点及压力检测方法,分析了现有检测系统存在的问题,阐述了圆柱螺旋弹簧压力检测系统的工作原理,详细论述了工作台的结构及控制系统的实现方法。
5) column compressed spring
圆柱压缩弹簧
1.
A method to realize the parameterized drafting of column compressed spring with Visual LISP program based on AutoCAD has described in this article.
:介绍在AutoCAD2002平台上,用VisualLISP语言编程来实现圆柱压缩弹簧的参数化绘图的一种方法。
6) cylindrical rubber spring
圆柱橡胶弹簧
补充资料：55°圆柱管螺纹的型式和尺寸
| 螺纹代号 | 基本尺寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 底孔尺寸 mm | |
| G 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 8.7 | |
| G 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 11.6 | |
| G 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.95 | 0.856 | 15 | |
| G 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 19 | |
| G 5/8 | 5/8＂ | 22.911 | 1.814 | 14 | 21.749 | 20.587 | 1.162 | 20.75 | |
| G 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 24.5 | |
| G 7/8 | 7/8＂ | 30.201 | 1.814 | 14 | 29.039 | 27.877 | 1.162 | 28 | |
| G 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 30.5 | |
| G 1 1/8 | 1 1/8＂ | 37.897 | 2.309 | 11 | 36.418 | 34.939 | 1.479 | 35 | |
| G 1 1/4 | 1 1/4＂ | 41.91 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 39.5 | |
| G 1 3/8 | 1 3/8＂ | 44.323 | 2.309 | 11 | 42.844 | 41.365 | 1.479 | 41.5 | |
| G 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 45 | |
| G 1 3/4 | 1 3/4＂ | 53.746 | 2.309 | 11 | 52.267 | 50.788 | 1.479 | 51 | |
| G 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 57 | |
| G 2 1/4 | 2 1/4＂ | 65.71 | 2.309 | 11 | 64.231 | 62.752 | 1.479 | 63 | |
| G 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 72.5 | |
| G 2 3/4 | 2 3/4＂ | 81.534 | 2.309 | 11 | 80.055 | 78.576 | 1.479 | 79 | |
| G 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 85.5 | |
| G 3 1/4 | 3 1/4＂ | 93.98 | 2.309 | 11 | 92.501 | 91.022 | 1.479 | 91 | |
| G 3 1/2 | 3 1/2＂ | 100.33 | 2.309 | 11 | 98.351 | 97.372 | 1.479 | 97.75 | |
| G 3 3/4 | 3 3/4＂ | 106.68 | 2.309 | 11 | 105.201 | 103.722 | 1.479 | 104 | |
| G 4 | 4＂ | 113.03 | 2.309 | 11 | 111.55 | 110.072 | 1.479 | 110.5 | |
| G 4 1/2 | 4 1/2＂ | 125.73 | 2.309 | 11 | 124.251 | 122.772 | 1.479 | 123 | |
| G 5 | 5＂ | 138.43 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 136 | |
| G 5 1/2 | 5 1/2＂ | 151.13 | 2.309 | 11 | 149.651 | 148.172 | 1.479 | 148.5 | |
| G 6 | 6＂ | 163.83 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条