1)  temperature contraction performance
温缩性能
1.
The mechanism of early strength is analyzed,and the mechanical property and temperature contraction performance are also tested.
通过一系列试验,对石灰粉煤灰稳定沙漠沙掺加早强剂 Na2CO3和 NaOH 后的早期强度作出了评价,分析了其早强机理,同时对其后期力学性能和温缩性能进行了试验。
2)  temperature contraction
温缩
1.
It researches and analyses the regularity, which is about the influence on the mixture s performance of the temperature contraction with different types of mineral gradation, dosages of cement, curing periods and temperature.
应用无机结合料稳定材料温缩试验方法及设备,研究分析了级配类型、水泥剂量、养生龄期及温度对水泥稳定碎石温缩性能的影响规律。
2.
Based on stability principle mechanism analysis and proportion design for lime fly ash stabilized mixture, early strength property, after mechanic property and temperature contraction property of the material are studied.
以石灰粉煤灰稳定沙漠风积沙作为底基层材料研究对象,在稳定机理分析、二灰稳定混合料组成设计的基础上,进行了二灰早强剂稳定沙早期强度、后期力学特性和温度收缩性能研究,得出二灰稳定沙漠沙强度增长及温缩规律,为工程实践提供了很有意义的依据。
3)  temperature shrinkage
温缩
1.
In order to study the dry shrinkage and temperature shrinkage performances of low activity fly-ash base course and solve the cracks problems of semi-rigid base course with different temperature and humidity.
目的为了研究低活性粉煤灰基层材料的干缩和温缩性能,解决半刚性基层材料随着温度和湿度的变化容易产生开裂的问题。
2.
Through the lab experiments of dry shrinkage and temperature shrinkage of some semi-rigid base course materials,some parameters such as the strain,coefficient of dry shrinkage and temperature shrinkage are obtained,that provides some fundamental information for the mixture ratio design of .
本文通过对几种半刚性基层材料进行室内干缩和温缩试验研究,分析其干缩应变、干缩系数、温缩应变、温缩系数等参数的变化规律,为科学地进行半刚性基层材料配合比设计和改善其抗裂性能提供一些基础资料。
4)  low-temperature polycondensation
低温缩聚
5)  Polycondensation
高温缩聚
6)  low-temperature cracking
低温缩裂
1.
Cause and prevention of the low-temperature cracking of the asphalt pavement;
沥青路面低温缩裂的原因与防治
参考词条
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。