1) air gap height
气隙高度
2) the critical highness of gas gap
临界气隙高度
3) gap thickness
气隙厚度
1.
The change of mould taper was simulated by adjusting the gap thickness in the corner region.
通过调整气隙厚度模拟结晶器角部锥度变化,使用有限单元法计算出不同锥度下方坯坯壳内的温度及应力场,明确了结晶器角部锥度对方坯温度及应力分布的影响。
4) air gap length
气隙长度
1.
Under different air gap length,the air gap magnetic field,back electromotive force,power factor,power efficiency and starting torque of the solid rotor permanent magnet synchronous motor(PMSM)were calculated by means of electromagnetic field numerical method.
采用有限元法计算了实心转子永磁同步电动机在不同的气隙长度条件下的气隙磁密、空载反电动势、功率因数、效率和起动转矩,在计算过程中考虑了定转子相对运动及定子斜槽等因素;22kW实心转子永磁同步电动机的计算和实验结果表明,电机气隙长度对气隙磁密、空载反电势、功率因数、效率和起动转矩均有较大的影响。
5) width of air gap
气隙宽度
6) high porosity
高孔隙度
1.
Neogene gas sandstone reservoirs in Baoshan Basin of Yunnan are characteristic of great various lithologies,high shale content,high porosity,middle-low permeability and electric characters deeply influenced by lithology.
云南保山盆地上第三系为高孔隙度中低渗透率含气砂岩储层特征,其特点是电性特征受岩性影响大和高孔隙度中低渗透率。
2.
A novel method was proposed and studied for the preparation of porous silica with high porosity using base-dissolving technology.
2cm3/g的高孔隙度多孔硅胶,其孔隙度从75%增加到88%。
3.
Using traditional way of powder metallurgy, porous material with high porosity, high penetrability and fine filter precision can be made by mixing additive with powder, then pressing and sintering.
本试验研究是在常规粉末冶金工艺的基础上,通过添加剂的加入,将金属粉末进行成形、烧结,制备出高孔隙度、高过滤精度、渗透性良好的金属粉末烧结多孔材料。
补充资料：气隙
分子式：
CAS号：
性质：在挤出涂层过程中，从模口到由压辊和冷却辊所形成的间隙（被涂覆材料在此被压平和冷却）之间的距离。也指在塑料的射频加热中电极和材料表面间的距离。
CAS号：
性质：在挤出涂层过程中，从模口到由压辊和冷却辊所形成的间隙（被涂覆材料在此被压平和冷却）之间的距离。也指在塑料的射频加热中电极和材料表面间的距离。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条