1) ultra narrow gap GMAW
超窄间隙GMAW
1.
Magnetic remnant research on steel 980 ultra narrow gap GMAW;
船用钢结构980钢超窄间隙GMAW工艺剩磁研究
2) ultra-narrow-gap welding
超窄间隙焊
1.
The ultra-narrow-gap welding is a high efficient welding technology in which I groove is used.
超窄间隙焊接是采用间隙尽量小的I形坡口得到高质量焊接接头的一种高效率焊接技术。
2.
The ultra-narrow-gap welding is a high efficient welding technology whose gap is shape I and is widely concerned by many nations.
超窄间隙焊接采用间隙尽量小的I形坡口得到高质量焊接接头的一种高效率焊接技术，受到各国广泛关注。
3) ultra-narrow gap welding
超窄间隙焊接
1.
Realization of ultra-narrow gap welding with flux strips constraining arc;
焊剂带约束电弧超窄间隙焊接的实现
2.
Method of gaseous protection of ultra-narrow gap welding with arc-constricting flux strips;
焊剂带约束电弧超窄间隙焊接的气保护方法
3.
Heating characteristic of constricting arc with flux strips in ultra-narrow gap welding;
焊剂带约束电弧在超窄间隙焊接中的加热特性
4) ultra-narrow-gap gas metal arc welding
超窄间隙MAG焊
5) narrow gap welding
窄间隙焊
1.
Based on the experiment of twin-wire narrow gap welding in single pool mode by employing alternative pulsed arcs, the influences of welding parameters on the appearance of weld and welding process stability were investigated.
采用交替脉冲,对双丝共熔池窄间隙焊进行工艺试验,研究了焊接参数对焊缝成形和电弧稳定性的影响。
2.
Lateral oscillation arc welding, high-speed-rotating arc welding, twin-wire welding, and ultra NGW(narrow gap welding) can all assure the fusion of side wall and improve the oppearance of weld in relatively small welding variables.
横向摆动电弧、高速旋转电弧、双丝焊和超窄间隙焊4类方式都可以在较小的焊接规范下,保证侧壁熔合,改善焊缝成形,防止焊接裂纹。
3.
The hollow-axis motor drives the offset nozzle and rotates the arc on the tip of wire at high speed,so as to ensure enough penetration into the sidewalls in narrow gap welding.
在该系统中,焊丝穿过电机的空心轴后从导电嘴的偏心孔送出,电机带动导电杆和偏心导电嘴旋转,从而使焊丝端部的电弧以一定直径高速旋转,以保证窄间隙焊接接头具有足够的侧壁熔深。
6) narrow discharge gap
窄间隙
1.
With the new technology of dielectric barrier, the reduced field reaches 300Td in the narrow discharge gap, and the electrons gain the average energy of 8eV.
利用介质阻挡强电离放电的物理方法,在常压窄间隙中获得折合场强大于300Td、电子平均能量大于8eV的强电场。
补充资料：胎圈过窄、子口窄、圈窄等
分子式：
CAS号：
性质：又称胎圈过窄、子口窄、圈窄等。轮胎工业中指两胎圈宽度不一致的现象。
CAS号：
性质：又称胎圈过窄、子口窄、圈窄等。轮胎工业中指两胎圈宽度不一致的现象。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条