1) the method of the second strut
二次支柱法
1.
We have acquired with our engineering very effectively on the research of integral optimization of formwork of strut system by using the method of the second strut that the top of pillars can be taken apart beforehand multifunctionally.
对模板支撑体系的整体优化进行研究,通过采用多功能早拆柱头的二次支柱法,取得良好的工程效果。
2) prop twice
二次支柱
4) quadratic cylinder
二次柱面
1.
Using the coefficient determinant and translation transformations,we discuss the positional relationship between a quadratic cylinder and a plane,which is involved the invariant of the quadratic surface and the invariants of the section of the quadratic surface,starting with discussing the positional relationship between a conic and a line.
利用系数行列式和平移变换,从二次曲线与直线的位置关系入手,借助二次曲面的不变量和二次曲面的截口不变量,由二次柱面的系数与平面的系数组成的行列式判定二次柱面与平面的关系。
5) secondary support
二次支护
1.
Study on laneway excavation monitoring and best secondary support time with new austrian tunnelling method;
新奥法巷道开挖监控及最佳二次支护时间的研究
2.
In order to determine the secondary support time and intensity,the changing rules of the stress and deformation speed of surrounding rocks with time,the effects of the secondary supporting time and intensity of surrounding rocks on deformation were analyzed using exponential creep model of FLAC2D at west tunnel in the Guhanshan Mine of Jiaozuo Coal Industry Group.
为了研究确定高应力软岩巷道二次支护时间和支护强度,以焦煤集团古汉山矿西大巷为研究对象,采用FLAC2D中的指数蠕变模型,研究分析围岩应力和围岩变形速度随时间的变化规律、二次支护时间及支护强度对围岩变形的影响规律。
3.
Ground reinforcement of the connecting aisle is finished successfully through strictly controlling key construction measures such as freezing holes construction,freezing station installation and secondary support.
通过严格控制冻结孔施工、冻结站安装及二次支护等关键施工措施,使得该地铁旁通道地层加固施工成功完成。
6) second support
二次支护
1.
Practice of second support theory applied to deep mine soft rock section chamber support;
二次支护原理在深井软岩硐室支护中的实践
补充资料:二次灌料法
分子式:
CAS号:
性质:在搪塑中将糊塑料灌注于加热到一定温度的模具中,待灌满模具后停留一段时间,再将糊塑料倾倒回盛器中,这时模壁留下的一层糊塑料已经部分发生胶凝,随即将模具送入烘箱内进行热处理。如果所得制品厚度仍达不到要求,可再进行重复的操作。其好处是可使制品减少带入空气的机会,并能较准确地控制厚度。也可以生产内外层为不同材料或颜色的制品,例如内层可以是发泡的,而外层则不是。
CAS号:
性质:在搪塑中将糊塑料灌注于加热到一定温度的模具中,待灌满模具后停留一段时间,再将糊塑料倾倒回盛器中,这时模壁留下的一层糊塑料已经部分发生胶凝,随即将模具送入烘箱内进行热处理。如果所得制品厚度仍达不到要求,可再进行重复的操作。其好处是可使制品减少带入空气的机会,并能较准确地控制厚度。也可以生产内外层为不同材料或颜色的制品,例如内层可以是发泡的,而外层则不是。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条