1) running gear
走行机构
1.
Here is the course of thinking in cart’s running gear designing, as well as the interpretation of the dependency of wheel press to freight yard foundation, force analysis to metal structure, and conclusion of load counting, service condition and main section to be checked, and the character of the electromechanical product.
介绍集装箱龙门起重机六轮大车走行机构的设计思路,说明了轮压与货场基础的关系,对金属结构的受力进行分析,对载荷计算进行归纳总结,选取了校核的工况和主要截面介绍该机电产品的特点。
2.
The comfort of rolling stock is improved with the use of reverse mass commutation and directional energy output of the action force on the running gear of rolling stock.
通过在铁道车辆走行机构上利用反向质量换向和作用力定向能量输出,来改善铁道车辆舒适性。
2) walking mechanism
行走机构
1.
Type synthesis on the walking mechanism of walking robot based on trace of foot joint;
基于足关节轨迹的步行机器人行走机构型式综合
2.
Design and research of walking mechanism of basket-shooting robots;
投篮机器人行走机构的设计与研究
3.
According to the charcteristic of wrok on walking mechanism,substitute sliding bearing for rolling bearing,and to structure form.
采煤机的行走机构,在实际检修、生产过程中会出现各种各样的故障与缺陷,根据行走机构的工作特点,用滑动轴承代替滚动轴承,并对其结构形式进行技术改造,使其维修、安装方便,实用性强。
3) traveling mechanism
行走机构
1.
For this purpose,the traveling mechanism of the billet transporting car is reformed in the study,and FEM is used for analyzing the parts strength of the traveling mechanism and the roller track.
对板坯横移车行走机构部分作了技术改造,并对其运输辊道的有关零件进行了有限元分析。
2.
Calculation formulas and design principles for drive and traveling mechanisms as key parts of the system are provided.
阐述了移动屋顶的机械传动和控制装置,并对机构各个系统实现功能和设计方案进行了分析,给出了驱动与行走机构关键部件的计算公式与准则。
3.
The calculation method of running resistances for the traveling mechanism of a rail- mounted bucket wheel stacker/reclaimer is introduced.
介绍了轨行式斗轮堆取料机行走机构各阻力的计算方法,并针对具体项目中的轨行式斗轮堆取料机进行了计算,提出了电机选型应遵循的原则和方法,讨论了电机打滑验算的方法和出现打滑现象的具体解决办法,完成了轨行式斗轮堆取料机行走机构驱动功率的计算及电机选型,实现了设计结果的安全可靠,经济成本也更趋合理。
4) running mechanism
行走机构
1.
The article briefly introduces the design and operating principles for the lateral and longitudinal running of the traveling form so that a convenient and concise set of running mechanism is scientifically worked out to promote the productivity of the traveling form.
文章简明扼要地介绍了移动模架纵移和横移机构设计原理及工作原理,利用科学的方法设计了一套方便、简捷的移动模架行走机构,提高了移动模架的生产效率,通过翔实的计算和分析介绍了整个移动模架行走机构的设计过程。
2.
A planetary wheel running mechanism was designed to adapt to the store environment of complex terrain and changeable geology of the cobalt and hydrothermal sulfide investigation area in the deep-sea bed.
为了适应深海富钴结壳和热液硫化调查区复杂地形多变底质,提出了深海采矿行星轮式行走机构。
5) running gear
行走机构
1.
To verify the traction performance on sand of the bionic camel foot tire,the comparative tests between bionic camel foot tire and the common tire were made in the indoor rig for studing interaction between vehicle running gear and sand.
根据轮胎牵引性能指标,在车辆行走机构-沙地试验台上对沙漠仿生轮胎和普通轮胎的牵引性能进行了对比试验。
2.
The walking boat vehicle was proposed as an unconventional running gear in this paper.
提出了步行船式车辆的非常规行走机构，对单个步行腿机构及步行船式车辆行走机构的运动进行分析，推导出有关运动方程，讨论了结构参数和土壤条件对步行船式车辆运动的影响，为研制步行船式车辆提供指
3.
This article mainly analyzes the track bulldozer running gear characteristic, the attrition form, and proposed the correct use, maintain metho
本文主要分析了履带式推土机行走机构的特点、磨损形式,并提出了正确使用、维护的方法。
6) crane travel(l)ing gear
起重机行走机构
补充资料：走胡走越
成语：走胡走越
【解释】： 汉高祖 欲拿 项羽 旧将 季布 ， 朱家 因 汝阴侯 滕公 劝 高祖 曰：“臣各爲其主用， 季布 爲 项籍 用，职耳。 项氏 臣可尽诛邪？今上始得天下，独以己之私怨求一人，何示天下之不广也！且以 季布 之贤而 汉 求之急如此，此不北走 胡 即南走 越 耳。夫忌壮士以资敌国，此 伍子胥 所以鞭 荆平王 之墓也。君何不从容爲上言邪？”见《史记·季布栾布列传》。后因以“走胡走越”谓智能之士被迫逃亡，而为敌国所用。 梁启超 《论中国学术思想变迁之大势》第三章第一节：“衰 周 之际，兼并最烈，时君之求人才，载飢载渴，又不徒奬励本国之才而已，且专吸他国者而利用之。盖得之则可以爲雄，失之且恐其走 胡 走 越 ，以爲吾患也。”
汉高祖欲拿项羽旧将季布，硃家因汝阴侯滕公劝高祖曰：“臣 各为其主用，季布为项籍用，职耳。项氏臣可尽诛邪？今上始得天下，独以己之私怨求一人，何示天下之不广也！且以季布之贤而汉求之急如此，此不北走胡即南走越耳。夫忌壮士以资敌国，此伍子胥所以鞭荆平王之墓也。君何不从容为上言邪？”见《史记·季布栾布列传》。后因以“走胡走越”谓智能之士被迫逃亡，而为敌国所用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条