1) VRLA
密封铅蓄电池
1.
Correlation Between Capacity and Conductance of VRLA;
关于阀控密封铅蓄电池容量与电导的相关性
2.
Under condition of that the state-of- charge for VRLA was higher than 50%, the difference of the internal resistance was too small, however the product of it s eletrochemical reactive resistance and electrical double layer capacitance was very sensitive to state.
密封铅蓄电池的荷电态在50%以上时,电池内阻几乎没有变化,但其电化学反应内阻与双层电容之积,却对荷电态很敏感。
2) sealed lead acid battery
密封铅酸蓄电池
1.
Analysis of failed sealed lead acid battery;
密封铅酸蓄电池失效原因分析
2.
Application of IC-UC3906 in sealed lead acid battery charger;
集成电路UC3906在密封铅酸蓄电池充电器中的应用
3.
This paper presents the voltages variation possibitity of the sealed lead acid battery in different discharges.
指出了在各种放电制下确定所研制的密封铅酸蓄电池电压变化的可能性。
3) sealed lead-acid battery
密封铅酸蓄电池
1.
Methods to identify if sealed lead-acid battery is dangerous goods;
密封铅酸蓄电池是否为危险品的鉴别方法
2.
Development of sealed lead-acid battery for starting application;
24V启动型密封铅酸蓄电池的研制
3.
Since middle 1990s, the sealed lead-acid battery has been applied to motorcycle with motorcycle industry development and shown many advantages, but its performance did not meet the high requirement of motorcycle.
自 1990年代中期以来 ,随着摩托车工业的发展 ,小型密封铅酸蓄电池已开始在摩托车上使用。
4) sealed lead-acid batteries
密封铅酸蓄电池
1.
Effect of organic additives on the performance of sealed lead-acid batteries;
有机添加剂对密封铅酸蓄电池电性能的影响
2.
This paper describes an improved charging method for sealed lead-acid batteries using the UC3906.
对于密封铅酸蓄电池,我们使用的传统充电电路是恒压限流充电电路。
3.
2Ah sealed lead-acid batteries with grids of four different compositions of alloys were collected and examined.
结果表明,在混合式板栅合金中,正板栅采用低锑合金,负板栅采用铅钙合金,密封铅酸蓄电池的自放电比较小。
5) VRLA batteries
阀控式密封铅酸蓄电池
1.
The causes of formation on PCL of VRLA batteries were analyzed, skills of AGM separators in VRLA batteries was supposed.
介绍了阀控式密封铅酸蓄电池用隔板的性能和国外隔板最新产品,简要讨论了添加剂对隔板性能的影响。
2.
Some parts of VRLA batteries such as grid,container,cover and valve are optimized in this paper according to the common problems occurred in the use of VRLA batteries.
针对目前阀控式密封铅酸蓄电池在使用中的常见问题,对蓄电池的板栅、槽、盖、安全阀等部件进行优化改进设计,并应用有限元法对电池槽、盖进行分析,优化设计出壁厚及结构合理的电池槽、盖,达到了延长电池使用寿命、确保电池可靠性的目的。
6) valve regulated lead acid battery
阀控式密封铅酸蓄电池
1.
Also,according to actual operation and maintenance,main points concerning life length of valve regulated lead acid battery were introduced which provided reference to the use of the battery.
结合电力系统通信电源的运行情况,阐述了通信直流电源对电力系统通信的稳定、安全运行的重要性,概述了阀控式密封铅酸蓄电池使用寿命的几个要点,结合实际的运行与维护经验,对规范阀控式密封铅酸蓄电池的使用提供参考。
2.
Maintenance and management of communication valve regulated lead acid battery;
随着阀控式密封铅酸蓄电池在电力通信系统的广泛应用,其安全稳定、可靠运行的重要性越趋明显,因此,必须加强对阀控式密封铅酸蓄电池组的管理和维护,提高其使用寿命,确保其供电的通信电路安全畅通。
补充资料:阀控密封式铅酸蓄电池
分子式:
CAS号:
性质: 用允许气体逸出的限压阀(单向排气阀)密封的一种铅酸蓄电池。其特点是采用特殊的铅基合金如铅钙合金和低锑合金制造板栅,以减少气体的析出,采用超细玻璃纤维隔板和贫液电解质,造成两极之间有气相“通道”,以利于正极产生的氧气向负极扩散并与负极的活性物质海绵状金属铅相化合。限压阀一般在电池内部压力高于外界压力1~200kPa时能够可靠地开启和关闭。多用作应急照明设备、不间断电源、移动测量设备、信号系统、电信装置和计算机等的直流电源。汽车蓄电池也有逐步改用这种蓄电池的趋势。
CAS号:
性质: 用允许气体逸出的限压阀(单向排气阀)密封的一种铅酸蓄电池。其特点是采用特殊的铅基合金如铅钙合金和低锑合金制造板栅,以减少气体的析出,采用超细玻璃纤维隔板和贫液电解质,造成两极之间有气相“通道”,以利于正极产生的氧气向负极扩散并与负极的活性物质海绵状金属铅相化合。限压阀一般在电池内部压力高于外界压力1~200kPa时能够可靠地开启和关闭。多用作应急照明设备、不间断电源、移动测量设备、信号系统、电信装置和计算机等的直流电源。汽车蓄电池也有逐步改用这种蓄电池的趋势。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条