1) packing density
装填分率
1.
The effect of packing density on shell-side mass transfer performance of hollow fiber membrane module;
装填分率对中空纤维膜组件壳程传质性能的影响
2) filling ratio
装填率
1.
The filling ratio for a liquid filled projectile is very important for the reliability design.
装液弹的装填率对弹的安全可靠性极其重要 。
3) packing density
封装分率
1.
Under low packing density,convection is significant in shell-side flow,which is preferable for the reduction of dead zone area and the higher utilization of contacting area.
较低的封装分率下,组件壳程对流作用明显,有利于减少死区,充分利用膜接触面积。
2.
This research work mainly investigated the effect of the packing density, operating manners and the membrane area on module.
本文以用于膜蒸馏的中空纤维膜组件为研究对象,重点研究了封装分率、操作方式、膜面积对组件性能的影响,并对膜组件进行模拟计算,确定了影响组件性能的主要因素。
3.
Direct contact membrane distillation experiments with a series of hollow fiber membrane modules of different packing density or different membrane area have been conducted,and the effects of the operating mode on the trans-membrane flux were investigated.
对一系列不同封装分率和不同膜面积的中空纤维膜组件进行了直接接触式膜蒸馏对比实验,并考察了操作方式对跨膜通量的影响。
4) multiple-partition backfilling policy
多分区装填策略
1.
Secondly,it designs and implements multiple-partition backfilling policy based on common scheduling policies and the main elements of scheduling decision.
调度策略是作业管理系统的关键内容,首先介绍了OpenPBS体系结构及工作原理,提出了OpenPBS中默认调度器FIFO存在的问题,然后通过分析通常的调度策略和影响调度决策的主要元素,设计和实现了多分区装填策略,最终根据模拟实验结果,分析了该策略的性能改进。
5) filling
[英]['fɪlɪŋ] [美]['fɪlɪŋ]
填料，装填
6) filling
[英]['fɪlɪŋ] [美]['fɪlɪŋ]
装填
1.
Improvements on the filling of ion exchange resin;
离子交换树脂装填方法改进
2.
The process to replace the catalyst of shifting furnace was introduced for large-sized ammonia synthesis plant;the requirements of type selection and filling method for catalyst were discussed.
介绍了大型合成氨厂低变炉更换催化剂的过程;论述了催化剂的选型要求和装填方法;阐明了催化剂还原过程中从还原前升温到还原初期、主期及末期的操作步骤和要求。
3.
Author has summarized the application situation of A203 type low temperature catalyst in 800 ammonia converter system,introduced the features and filling method of this catalyst;discussed the heating-reducing schemes and operating gists;through the comparison of production operation data,evaluation was made for application effect of A203 type ammonia synthesis catalyst.
介绍了该催化剂的特性和装填方法;论述了升温还原方案和操作要领;通过生产运行数据的比较,对A203型氨合成催化剂的应用效果进行了评价。
补充资料：Usp45通用自动装填手枪
usp45通用自动装填手枪
【规格参数】
全枪质量: .72 千克(kg) *含弹匣
全 长: 194 毫米(mm)
枪 管 长: 108 毫米(mm)
瞄准基线: 长158 毫米(mm)
其它参数: 枪全高136mm,全宽32mm,扳机力单20n/双50n
【主要简介】
usp一开始只有9mm和.40s&w两种口径，虽然这两种型号相当受欢迎，但许多美国人始终对.45口径情有独钟，当年在美国军方选择发射9mm的伯莱达92f手枪作为制式手枪后，发射.45acp（automatic colt pistol ）弹的m1911手枪系列仍在民间或各个军事部门和执法机构中广泛使用。所以hk公司便设计了发射.45acp弹的usp，并于1995年5月推出市面。
由于发射的枪弹尺寸和威力都变大了，一些部件需要强化，而外形尺寸也有一些改变。为了不使握把变得过大导致难以握持，usp原来的塑料制弹匣改为钢制弹匣，容量12发，民用型的弹匣则为10发。许多原来usp的零件和附件仍可通用，如utl等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。