1) Purification of training samples
训练样本纯化
2) training sample
训练样本
1.
With the Kohonen network clustering in neural network employed, the degree of relationship of the universal joint axle of the rolling mill was input to Kohonen network as the training sample, studied and clustered by the network to generate different clustering centers according to the different depth and different degree of relationship among the cracks.
利用神经网络中的Kohonen网络聚类的特点 ,把轧钢机万向接轴裂纹故障不同的关联度作为Kohonen网络的训练样本输入到Kohonen网络 ,并由网络进行学习和聚类 。
2.
Exact agricultural crops identification and planting area measure depend on not only classifiers but also training samples imported into classifiers.
准确的遥感农作物类型识别和种植面积统计,不仅仅取决于不同分类方法的选择,同时还要看输入分类器用以学习的训练样本数据,训练样本对分类精度的影响比分类技术本身对测量精度的影响还要大。
3.
Typical fault characteristics are selected as training samples and GA is used to optimize the structure and original weight distribution of BP networks.
提出了一种用故障的典型特征作为训练样本、遗传算法与BP网络相结合的模拟电路故障诊断新方法。
3) training samples
训练样本
1.
Studies on the purification of training samples in supervised classification by mode filtering;
利用众数滤波对监督分类训练样本纯化的研究
2.
A purified algorithm for training samples based on local automatic searching and spectral matching technique is presented.
提出了一种基于局部自动搜索和光谱匹配技术的监督分类训练样本的纯化方法。
3.
In this paper, using orthogonal experiment method, taking three layers feed forward neural network as a example, problem of choosing training samples, weights and bias, training parameter of neural network is analyzed and studied.
运用正交试验法,以三层前向型神经网络为例,对神经网络的训练样本、权值和阀值、训练参数的选择进行分析和研究。
4) Sample training
样本训练
1.
In this paper, relevant parameters influencing sample training precision are explored when the mixtures of experts networks is applied to boiler fault diagnosis,and the relationahip between the square sum of studying error and some parameters,such as rule numbers、studying rate、cycle numbers、weighted exponent,are presented.
探讨了将混合专家网络应用于锅炉故障诊断时,影响样本训练精度的有关参数,得出了规则数、学习率、循环次数、加权指数等参数与样本训练学习误差平方和之间的关
2.
The statistical learning theory based on sample training was applied to analyze the difference and relativity of images figures,and then the common figures and distinct figures of each sort image were catched to form the identification and classification model.
利用基于样本训练的统计学习原理,在分析各类图像样本特征上的差异和相关性的基础上,提取图像共同特征和显著特征参数集合,并加入人为启发式思想,结合先验知识的指导和计算机特征分析结果来制订特征提取规则,应用Dempster-Shafer(DS)理论的思想融合提取的多个特征,形成启发式分类模型。
6) one training sample
单训练样本
1.
A new method based on Discriminative Common Vector in case of one training sample scenario was presented.
该方法基于人脸类内方差相似的假定,通过引入单人多样本的辅助人脸集来估计类内方差,解决了单训练样本情况下样本类内方差无法估计的问题。
补充资料:DCZc系列氮气纯化设备

技术指标:
纯度≥99.9995%
露点≤-70℃
氧含量≤5ppm
氢含量≤1ppm
特点:
原料气氧含量小于1000ppm时,使用高效脱氧剂除氧,氮气纯度和压力不受氢气影响。
DCZc氮气纯化设备工作原理图

型号规格 | 额定处理气量 | 有效供气量 | 耗氢量 | 装机功率 | 使用功率 | 冷却水 |
Nm3 | Nm3/h | Nm3/h | kw | kw | T/h | |
DCZc-10 | 11 | 10 | 0.028 | 2 | 1.0 | 0.9 |
DCZc-20 | 22 | 20 | 0.06 | 4 | 2.0 | 1.5 |
DCZc-40 | 44 | 40 | 0.11 | 8 | 4.0 | 3.5 |
DCZc-60 | 66 | 60 | 0.17 | 12 | 6.0 | 5.5 |
DCZc-80 | 88 | 80 | 0.22 | 16 | 8.0 | 7.0 |
DCZc-100 | 110 | 100 | 0.28 | 21 | 10.5 | 9.0 |
DCZc-120 | 132 | 120 | 0.33 | 25 | 12.5 | 10.5 |
DCZc-150 | 165 | 150 | 0.40 | 31 | 15.5 | 13.5 |
DCZc-180 | 198 | 180 | 0.50 | 37 | 18.5 | 16.0 |
DCZc-200 | 220 | 200 | 0.55 | 42 | 21.0 | 18.0 |
DCZc-250 | 275 | 250 | 0.69 | 52 | 26.0 | 22.5 |
DCZc-300 | 330 | 300 | 0.83 | 63 | 31.5 | 27.0 |
DCZc-350 | 385 | 350 | 0.96 | 73 | 36.5 | 31.0 |
DCZc-400 | 440 | 400 | 1.10 | 84 | 42.0 | 36.0 |
DCZc-450 | 495 | 450 | 1.25 | 94 | 47.0 | 40.5 |
注:本表所列数据以20℃环境温度,0米标高,80%相对湿度,设备进口氮气纯度为99.5%, 25℃冷却水温度为设计基准。
瑞安市耀星气体净化器材有限公司
地址:浙江省瑞安市塘下镇新陈东路137号
电话:0577-65396358
传真:0577-65396398
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条