1) reburn accident
二次燃烧事
1.
Taking the reburn accident of right side air preheater of No.
73-II3型循环流化床锅炉空气预热器二次燃烧事故的原因,并提出相应的预防措施及事故发生时应采取的处理方式,强调运行人员要监测尾部烟道内各点温度和变化情况,保证锅炉安全经济运行。
2) post-combustion
二次燃烧
1.
Study of the post-combustion flow field at the initial stage in BOF;
氧气顶吹转炉冶炼初期二次燃烧气相场的实验研究
2.
Influence Factors and Application of Post-Combustion in Arc Furnace Steelmaking;
电弧炉炼钢中碳氧二次燃烧的影响因素和应用
3.
According to present development of 100 t FSF of Angang,the rational burden mix is analyzed and the technological measures of energy and material saving for FSF steelmaking are presented,including bunden ratio,foaming slag operation,electrode cooling with spray water,power supply system,oxy-fuel burner and post-combustion and so on.
其中包括:配料制度、泡沫渣操作、喷水冷却电极、供电曲线、氧油烧嘴和二次燃烧等。
3) Secondary combustion
二次燃烧
1.
Experimental investigation on secondary combustion in solid rocket ramjet;
固冲发动机补燃室二次燃烧实验研究
2.
Influence of afterburning chamber length on secondary combustion for solid ducted rocket motor;
补燃室长度对固冲发动机二次燃烧的影响
3.
Study on secondary combustion chamber air-inlet scheme of unchoked solid rocket ramjet;
非壅塞固体火箭冲压发动机二次燃烧室进气方案研究
4) after-burning
二次燃烧
1.
Effects of the angles of binary air-inlets on after-burning of ducted rocket motors;
二元进气道夹角对冲压发动机二次燃烧的影响
2.
The furnace temperature control and the after-burning control widely-used for continuous annealer in late years are mainly described.
主要介绍了炉温控制和近年来在连续退火炉中广泛应用的二次燃烧控制。
3.
Study of suppression after-burning with some additive on rocket motor exhaust is introduced.
介绍了几种添加剂抑制火箭发动机喷焰二次燃烧的实验研究。
5) Second combustion
二次燃烧
1.
As a result, it is important to know about molten steel temperature effect factor of second combustion in RH refining.
在质量守衡、动量守衡、能量守衡的基础上,建立了RH真空精炼过程真空室内二次燃烧数学模型。
6) post combustion
二次燃烧
1.
The components and technical characteristics of post combustion system of blowing low pure oxygen (90 94 % oxygen) into certain area of 70 t UHP EAF through post combustion (PC) lance is presented.
介绍了淮钢采用二次燃烧氧枪向 70 t超高功率电弧炉的一定区域内吹入低纯氧气进行二次燃烧 ,理论计算了二次燃烧的供氧流量和节能效果 ,并与已获得的工业效果进行了比较 ,结果表明了在超高功率电弧炉上应用二次燃烧技术效果较
2.
Through laboratory experiments,the time related variation of gas contents and post combustion ratio of fume during the heating of oil bearing scrap are studied.
在某些废钢熔炼过程中，当炉料中含碳及碳氢物质且燃烧不充分时，会带来烟气中一氧化碳的燃爆、油污挥发时造成的烟雾、臭味等问题－ 通过实验室装置研究含油废钢在加热过程中烟气成分随时间的改变以及二次燃烧率的变化，试验结果表明，反应过程的限制性环节是油分的热分解；在较低的温度下φ（ＣＯ）／φ（ＣＯ２） 比例影响转化率和二次燃烧率；而在任意比例下保证充分反应的温度为９００ ℃以
补充资料：二事非行
【二事非行】
（名数）指樗蒲围棋与种种歌舞伎乐。律宗所谈。
（名数）指樗蒲围棋与种种歌舞伎乐。律宗所谈。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条