1) axle stress
车轴应力
2) axle stress spectrum
车轴应力谱
3) triaxial stress
三轴应力
1.
Experimental study of acoustic emission characteristics of granite thermal cracking under middle-high temperature and triaxial stress
中高温三轴应力下鲁灰花岗岩热破裂声发射特征的试验研究
2.
Based on elasticity theory, the triaxial stress formulas of casing exposed to thermal steam under thermal stress and non-uniform in-situ stress were derived.
以暴露于热蒸汽中的目的层套管为研究对象,根据弹性力学理论,首先给出了套管在热应力和非均匀地应力作用下的三轴应力表达式,然后利用对套管施加预应力来降低套管的轴向热应力,以使得套管的有效应力控制在相应温度下套管的最小屈服极限内为原则,得到了热采井套管三轴预应力设计方法,并对辽河油田常用的N80钢级套管进行了预应力设计分析,给出了该套管在不同注汽温度和井深条件下所应使用的径厚比及相应的预应力值。
3.
Based on the elastic theory,this paper derived the triaxial stress formulas of casing exposed to heating steam under thermal stress and non-uniform geologic stress,and established a new method to design the prestress of casing.
以暴露于热蒸汽中的目的层套管为研究对象,根据弹性力学理论,首先给出了套管在热应力和非均匀地应力作用下的三轴应力表达式,然后利用对套管施加预应力来降低套管的轴向热应力,使得套管的有效应力控制在相应温度下套管的最小屈服极限内为原则,得到了热采井套管三轴预应力设计方法,并对辽河油田常用的N80钢级套管进行了预应力设计分析,给出了该套管在不同注汽温度和井深条件下所应使用的径厚比及相应的预应力值。
4) axial stress
轴向应力
1.
Measuring the axial stress in elliptic aluminum film using interference method;
干涉法测量铝薄膜的轴向应力
2.
Calculation and statistical analysis of maximal axial stress at mining subsidence area
采空塌陷区管道最大轴向应力计算及统计分析
3.
02 Rock Mechanics Test System,we tested the permeability of broken shale during its compacting process,getting the relation of the axial stress with differential seepage pressures and the relation of pressure gradient with seepage velocity.
02岩石力学伺服试验系统上完成了破碎页岩压实过程中的渗透特性测定,得到了轴向应力、渗透压差、水头梯度与渗流速度的关系,并分析了各种粒径破碎页岩在不同渗透速度下,轴向应力对渗透系数的影响。
5) triaxial stress state
三轴应力
1.
In order to study the damage mechanism under different stress states of aluminum alloy component, two kinds of representative triaxial stress states have been adopted, namely notch tensile and pure shear.
为了研究铝合金构件在不同应力状态下损伤机理,采取了两种代表性的三轴应力状态,即缺口拉伸与纯剪切所产生的应力状态。
6) biaxial stress
双轴应力
1.
Several important factors influencing casing design and strength checkout were discussed in this paper, such as temperature and biaxial stress.
从温度对套管柱强度的影响、下部套管柱双轴应力计算等几个方面讨论了高温高压对套管柱设计和强度校核的影响 ,提出了一套适用于高温高压井套管柱设计和强度校核的理论方法 ,并给出了该方法的计算步骤 ,编制了相应的计算软件。
2.
The damage evolution characteristics of concrete under biaxial stress are studied in this paper.
利用作者提出的混凝土各向异性损伤模型研究了混凝土材料双轴应力下的损伤演变规律在双轴应力比小于4。
3.
At present,concretes and reinforced concretes are designed in uniaxial strength,but actually most of buildings are under biaxial stress.
文中从细观层次上分析了混凝土的内部结构,对混凝土试块在双轴应力作用下的力学特性进行了较为全面的随机骨料模型数值模拟。
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条