说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 拟满应力
1)  imitative full-stress
拟满应力
1.
Regarding the rigid frame as studying object, a hybrid algorithm composed of the imitative full-stress design method and the standard genetic algorithm was proposed for solving the question of discrete topology optimization.
以刚架结构为研究对象,提出一种遗传算法和拟满应力算法相结合的杂交算法,来解决离散变量结构拓扑优化设计问题。
2.
An imitative full-stress design method was presented for structural optimum design with discrete variables.
本文以满应力设计思想为基础,提出了适用于离散变量结构优化设计计算的拟满应力设计方法。
2)  imitated full-stress method
拟满应力法
1.
Combined with GA,BP neural network is introduced into the optimization analysis of beam string structures and the imitated full-stress method for structures with discrete variables is amended to form a new type of combinational optimization method.
将BP神经网络引入平面张弦梁结构的优化分析,并针对离散变量结构的拟满应力法加以改进,与遗传算法相结合从而构成一种新型组合优化方法,并将该法应用于平面张弦梁结构算例的优化分析,结果表明了算法有效可靠,最后对算法的计算精度和速度进行了讨论。
2.
Combined with GA(genetic algorithm),BP neural network is introduced into the optimiza-tion design of beam string structures and the imitated full-stress method for structures with discrete variables is amended to form a new type of combinational optimization method.
利用神经网络的强大映射功能,采用拟满应力法分析杆件截面变量的离散性,同时与遗传算法相结合而构成的一种新型组合优化方法,经平面张弦梁结构算例优化分析表明,计算速度快捷、有效可靠且能够满足工程精度要求。
3)  imitative full stress design
拟满应力设计
1.
Through introducing an imitative full stress design operator in genetic algorithm(GA),a optimum design technique was proposed for section optimization of frame structure with discrete variables,namely the section optimization technique of frame structure based on full stress design and GA.
通过在遗传算法中嵌入拟满应力算子,提出了一种以网架结构杆件截面作为离散变量的优化设计方法,即基于拟满应力设计和遗传算法的网架截面优化方法。
4)  quasi-full stress algorithm
拟满应力算法
1.
A hybrid algorithm (HA) integrating the quasi-full stress algorithm and the standard genetic algorithm (SGA) is proposed to expedite the evolving process of genetic algorithm so as to apply it to the topology optimization of truss structures with discrete variables.
为了加快遗传算法的进化过程,提出了遗传算法和拟满应力算法相结合的杂交算法,并将它应用于离散变量桁架结构的拓扑优化问题·在对桁架结构受力分析的基础上,提出一种启发式方法对随机生成的拓扑结构形式作必要修正,以快速产生符合机动性要求的拓扑结构形式·利用遗传算法进行桁架结构拓扑优化,用拟满应力算法进行截面优化,并将截面优化的结果传递给遗传算法作为拓扑优化中遗传操作的根据,这样大大减少单纯用遗传算法进行优化的解空间,从而加快搜索进程·算例的结果表明,该方法用于桁架结构拓扑优化是简单、快速和有效的
5)  imitative full-stress design method
拟满应力遗传算法
6)  variable full stress
变满应力
1.
Based on the load carrying factor,a new dimensionless criterion of load carrying factor coefficient with the theory of variable full stress and finite element method(FEM) is proposed to support structrual mass evalution with higher accuracy at the initial stages of airframe design.
为了在机翼设计的初始阶段,给出比较准确的结构质量估算,在承载因子的基础上,结合变满应力理论与有限元技术,提出了一种采用承载因子系数进行质量估算的方法,并给出了其在桁条蒙皮式机翼结构中的应用方案。
补充资料:轧辊残余应力(见轧辊应力)


轧辊残余应力(见轧辊应力)
residual stresses in roll

zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条