1) nucleation parameter
形核工艺
1.
Influence of nucleation parameters on morphologies and resistivity of diamond thin films of radiation dosimeter;
形核工艺对金刚石膜形貌和电阻率的影响
2) nuclear engineering
核工艺学
3) deformation process
变形工艺
1.
Effect of deformation process on superplasticity of TC11 titanium alloy
变形工艺对TC11钛合金超塑性的影响
2.
The effect of deformation process parameters on microstructure and mechanical properties of as-hot rolled Si-Mn dual-phase steel were studied by controlled rolling and controlled cooling test.
以热轧Si-Mn系双相钢为研究对象,在实验室通过控制轧制和控制冷却实验,研究了变形工艺参数对高强热轧双相钢显微组织和力学性能的影响。
3.
The relationship of the heat deformation processes of the antirust aluminum alloy LF6 and its microstructure were studied.
研究了防锈铝合金LF6热变形工艺对组织的影响。
4) forming technique
成形工艺
1.
New problems in developing car body stamping forming techniques and mould technology;
发展车身冲压成形工艺与模具技术面临的新问题
2.
A study of the exclusion-forming technique for the left cylinder bottom
左筒底挤压成形工艺研究
3.
Introduces briefly the development of spark plug housing manufacturing technique,recommends cold extrusion technique due to its good economical/technological significance,analyses the characteristics of some different kinds of cold extrusion forming techniques,and shows their application ranges as well as some key problems in the practical uses.
简述了火花塞铁壳制造工艺发展过程及采用冷挤压技术之经济及技术的意义 ,分析研究了几种冷挤压成形工艺方案的特点 ,指出各方案的适用范围 ,并提出了应用冷挤压技术中值得注意的几个问
5) forming technology
成形工艺
1.
The forming technology of a shaped piece was analyzed.
分析了异形件成形工艺,利用UG和Dynaform软件确定了零件的毛坯形状及尺寸,介绍了异形件落料拉深复合模结构设计和工作过程,对异形件拉深过程进行了数值模拟,根据模拟结果分析了成形性能。
2.
The forming technology of the precision roller was presented.
介绍了精密滚子成形工艺及多工位级进模中的拉伸工位、整形工位、冲孔工位、挤光工位、翻转机构、顶出机构、自动送料机构的设计和工作过程。
3.
Local forming technology is used much more in practical industry.
零件的局部成形在实际生产中应用较多,在零件的形状与材料确定时,其成形质量主要取决于成形工艺和模具结构。
6) forming process
成形工艺
1.
Numerical simulation analysis and optimization on forming process of automotive body framework;
汽车骨架类零件成形工艺数值模拟分析与优化
2.
By analyzing the forming process to engine bracket lower plate, and introduced the design of bending die,some measures to control spring back were extracted, the spring back problem of engine bracket lower plate was solved.
通过对发动机支架下板成形工艺的分析及其弯曲模结构的介绍,总结了几种控制回弹的措施,解决了发动机支架下板回弹难以解决的问题。
3.
A new forming processes,Solid Granules Medium Forming processes(SGMF) was presented,which can overcome the disadvantages of rigid-tool forming;and has their advantages.
提出一种既能克服刚性模成形和软模成形的缺点又吸取它们各自优点的成形工艺———管材固体颗粒成形工艺(SGMF),为材料的制备和加工提供了新的方法和手段。
补充资料：核燃料循环工艺学
分子式：
CAS号：
性质：介绍核燃料的生产、在反应堆中使用和回收利用的全过程的有关知识。是从事核科学技术教学、研究与管理人员必须掌握的内容。它包括：(1)核燃料循环的首端过程即核资源开发和燃料加工；(2)核燃料在反应堆中的使用及反应堆的堆型与发展；(3)核燃料循环的后端即乏燃料后处理及废物处置等。
CAS号：
性质：介绍核燃料的生产、在反应堆中使用和回收利用的全过程的有关知识。是从事核科学技术教学、研究与管理人员必须掌握的内容。它包括：(1)核燃料循环的首端过程即核资源开发和燃料加工；(2)核燃料在反应堆中的使用及反应堆的堆型与发展；(3)核燃料循环的后端即乏燃料后处理及废物处置等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条