1) Welding & Rolling Processe
焊接轧制
2) explosion weld and rolling
爆炸焊接-轧制
3) no-end welding rolling
无头焊接轧制
4) brazing and soldering rolled
钎焊轧制
1.
Aiming at the fairly disadvantages in different realizations of stainless-clad steel plate at present,a new production method-brazing and soldering rolled method is developed.
针对目前不锈钢复合板各生产方法存在的诸多不足,研制开发了钎焊轧制法。
5) direct rolling
直接轧制
1.
The direct rolling technology for conventional hot wide strip mill used in Europe and America;
欧美宽带钢常规流程直接轧制技术
2.
With the steelmaking-casting-direct rolling process in laboratory,the influence of different charging temperature on microstructure and properties of X70 pipeline steel were researched.
采用实验室炼钢—连铸—直接轧制方法,研究了用连铸连轧工艺生产X70管线钢时不同的热装温度对成品组织性能的影响,结果表明,800℃热装比1100℃热装的钢板晶粒尺寸细小,位错密度高,因而强度较高,韧性也能满足要求;而1100℃热装的钢板,析出物尺寸比800℃热装时细小、分散,韧性较好。
3.
The conventional hot rolling production technologies, including the endless rolling technology, the hot-delivery, hot charging and direct rolling of continuous cast billets, the ferrite - rolling technology, as well as the lubrication and automatic control techniques for hot rolling, are overviewed in this discussion.
介绍了传统热连轧新技术,包括无头轧制技术、连铸板坯热送热装和直接轧制技术、铁素体轧制技术、热轧工艺润滑技术、自动化控制技术的特点。
6) vacuum hot roll bonding
真空热轧焊接
1.
This article describes a study of the application of a vacuum hot roll bonding technique to Ti alloy plate and stainless steel plate using the composite interlayer of copper(pure copper and copper contains lanthanon Yt) and Nb sheet.
采用铜(纯铜及含稀土元素钇的铜)+铌的复合中间层进行了钛合金与不锈钢板的真空热轧焊接试验,测试了接头拉伸强度,并利用金相显微镜、扫描电镜、XRD、能谱对连接界面的微观结构、断口形貌及中间层材料铜的组织进行了分析,结果表明,连接界面结合良好,无未焊合或开裂处;焊后未生成金属间化合物,在铌-钛合金界面处存在一厚度约为2。
补充资料：板带轧制速度规程(见板带轧制规程设计)
板带轧制速度规程(见板带轧制规程设计)
speed schedule for plate and strip rolling
bandai zhazhi sudu guieheng板带轧制速度规程(speed seheduxe fo:plateand strip rolling)见板带札制规程设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条