1) hoop rigidity
环向刚度
1.
Then, their compression flat linear load and hoop rigidity also have a large scope.
管子压扁线载荷和环向刚度变化很大。
2) axial rigidity
轴向刚度
1.
Calculation and influence analysis for axial rigidity of a super-long single pile;
超长单桩轴向刚度的计算及其影响因素
2.
Its axial rigidity directly influences the positioning accuracy of CNC machine.
滚珠丝杠螺母传动机构是数控机床的进给传动部件,其轴向刚度直接影响数控机床的定位精度,应用变行协调原理给出了滚珠丝杠螺母传动机构的轴向刚度计算方法,计算结果显示,两端固定支承的丝杠的轴向刚度随长度按抛物线规律变化,并不是定值。
3.
The effect of axial rigidity and assembly part matching on product tolerance and bearing service life were analyzed based on theory and practic
从理论与实践结合的角度分析了ＧＹ短应力线轧机轴向刚度及轴向组合件的配置对轧件尺寸精度及轴承寿命的影响，并提出了其相应措施。
3) transverse stiffness
横向刚度
1.
Finite element analysis of transverse stiffness and strength of rubber parts for type SS9 locomotive′s axle-box pull-rod;
SS9型机车轴箱拉杆横向刚度及其橡胶件强度有限元分析
2.
Static finite element analysis of transverse stiffness of air spring used in a car;
汽车用空气弹簧横向刚度的静态有限元分析
3.
In the test and evaluation investigation of Baotou Huanghe River Bridge on Baotou-Shenmu Railway,it was found that the transverse stiffness of the Bridge could not meet the requirements in the codes and specifications,and it was determined that the Bridge must be strengthened and the strengthening design of the Bridge would be mainly based on the transverse natural vibration frequency.
包神铁路包头黄河大桥检定研究中,其横向刚度不能满足规范要求,必须进行加固。
4) axial stiffness
轴向刚度
1.
Analysis of materials coefficient of rubber Mooney-Rivlin model impacting on the axial stiffness;
橡胶Mooney-Rivlin模型材料系数对轴向刚度影响分析
2.
The experimental results show that the axial stiffness of unidirectionally wound tubes is a little higher than that of cross wound tubes.
实验结果表明,无纬结构管件比有纬结构管件的轴向刚度略高些。
3.
By the classical method of material mechanics,the deformation of carbon-tube nanosprings under transverse and axial loading was analyzed respectively,and the transverse and axial stiffness of carbon-tube nanosprings was formulated.
分析了碳管纳米弹簧在横向、轴向载荷作用下的变形,给出了碳管纳米弹簧的横向刚度K_r与轴向刚度K_l的表达式。
5) lateral rigidity
横向刚度
1.
Study of the lateral rigidity calculation for secondarysuspension with rubber side bearing on electric locomotive;
电力机车二系橡胶堆旁承横向刚度计算方法的研究
2.
This paper describes the weaker lateral rigidity of the portal crane.
本文介绍该门式起重机横向刚度较弱的问题 ,可供类似临时结构参考。
3.
The calculation results of free vibration characteristics,lateral rigidity,the Sperling and Dickeeman comfortable standards are presented about Banqi-2 flat curved continuous rigid frame bridge of Nanning-Kunming Railway.
介绍了南昆铁路板其二号PC平弯连续刚构大桥的自振特性、横向刚度、舒适度斯佩林指数及狄克曼指数计算结果 ,并结合全桥的动静载试验 ,评价了本桥的力学和使用性能 ,证明这种新结构能满足正常使用要求 。
6) transverse rigidity
横向刚度
1.
The paper also analyzes issues of design considerations for bridge transverse rigidity, stability and deck system structure design, and points out that the design and construction of the Bridge will promote the longspan railway bridge to.
概要介绍万州长江铁路大桥因应所处建设条件,主桥采用三跨连续钢桁拱-梁组合体系桥梁新技术的方案比选情况、结构布置及静力分析结果;分析介绍了横向刚度问题、稳定问题及桥面结构的设计思路。
2.
To analyse the demand of transverse rigidity and the strengthening scheme of deck plate girder according to the raising speed experiment of the existing track.
通过既有线铁路提速试验，分析了上承钢板梁横向刚度的要求，提出合理的加固方案。
补充资料：JPZ型三向等刚度橡胶减震器
分子式：
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条