2) fixed bracket
固定支架
1.
Combined with the producing practice,this paper introduces its working principle and process of the spot welding of wiper fixed bracket and the factors influencing the welding quality.
本文结合生产实际,阐述了刮水器固定支架点焊的原理、工作过程,以及影响焊接品质的因素,提出了该焊接的工艺参数、注意事项和实用的检验方法。
2.
The bending technology of fixed bracket for the tube of excavator was analyzed.
分析了挖掘机油管固定支架的弯曲成形工艺 ,介绍了该零件的弯曲模结构及其工作过程 ,并介绍了该模具主要零件的设计制造。
3) fixed support
固定支架
1.
Importance of fixed support in heat pipe net;
浅谈固定支架在热力管网中的重要性
2.
The result shows that the scheme using ball joint compensators is feasible, which reduces the quantity of fixed supports and is easier to construct.
针对管径大于1000mm的高温热水管道穿越市区不允许开挖道路的情况,考虑3种管道设计方案,分别进行了分析,比较结果表明,采用球型补偿器的方案切实可行,不仅可以减少固定支架的数量,而且可以降低施工难度。
3.
In the design of the compensators and supports of the piping line, th e amount and the recuperability of the fixed supports should be reduced as much as possible, and the distance between any two fixed supports should be enlarged as much as possible according to the features of the piping line, from which the economic benefit of the piping line can be fully embodied.
在管系补偿器与支架的设计中,应尽可能减少固定支架的数量及固定支架的复原力,两个固定支架间距离可根据管系特点尽可能加大,将使管网经济性得到充分体现。
4) External fixator
外固定支架
1.
Significance of external fixator in multi-staged management of high energy Pilon fracture;
外固定支架在高能量Pilon骨折分期治疗中的地位和意义探讨
2.
Treating distal radius fracture with radiocarpal subluxation using external fixator;
外固定支架治疗桡骨远端骨折合并桡腕关节半脱位疗效分析
3.
Objective To observe the curative effet of the external fixator and transplant of auto marrow to treat the angle abnormality of old fracture in below limbs.
目的 观察用外固定支架并自体骨髓移植治疗陈旧性下肢骨折成角畸形的疗效。
5) External fixation
外固定支架
1.
Application of external fixation in orthopaedics surgery;
外固定支架治疗长骨骨折临床疗效观察
2.
The results of external fixation combined with internal fixation in the treatment of tibial and fibula complicated fracture;
外固定支架结合有限内固定治疗胫腓骨粉碎性骨折32例报告
3.
Treatment of severely infectious bone defect in lower limb by bone extension with external fixation;
外固定支架骨搬移技术对严重下肢感染骨缺损的治疗
6) External fixators
外固定支架
1.
External fixators with kirschner wire for fractures of distal radius fractures;
单侧外固定支架结合克氏针内固定治疗桡骨远端骨折
补充资料:固定化固定相开管柱
分子式:
CAS号:
性质:固定化固定相是:(1)固定相分子间进行共价交联;(2)固定相与毛细管内表面进行化学键合。主要固定化方法有原位加热缩合法、原位自由基诱导法等。通常涂渍方法制备的开管柱在升温使用中,不同程度发生固定液流失、液膜破裂等现象,而固定化固定相开管柱柱性能稳定,柱效高。
CAS号:
性质:固定化固定相是:(1)固定相分子间进行共价交联;(2)固定相与毛细管内表面进行化学键合。主要固定化方法有原位加热缩合法、原位自由基诱导法等。通常涂渍方法制备的开管柱在升温使用中,不同程度发生固定液流失、液膜破裂等现象,而固定化固定相开管柱柱性能稳定,柱效高。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条