1) Parallel strand lumber
单板条层积材
1.
Parallel strand lumber(PSL)is a new kind of enginering material in the recent years.
本项研究以杨木单板条为原料，在试验室条件下，研究了单板条层积材（ＰＳＬ）的热压温度、热压时间、热压压力及板材密度与板材性能之间的关系，并进行了优化处理，得出最佳热压参数：温度Ｔ＝１４５℃，时间ｆ＝２０ｍｉｎ（板厚１５ｍｍ），板材密度Ｄ＝０。
2.
The characteristics, production,utilization and development of engineered wood products including laminated veneer lumber, glulam, oriented strand board, scrimber and parallel strand lumber are introduced.
介绍了工程结构材（包括单板层积材、胶合木、定向刨花板、重组木和单板条层积材）的性质、生产和应用现状以及发展前
2) Laminated veneer lumber
单板层积材
1.
The detecting system of stress wave velocity for laminated veneer lumber bending strength based on single chip;
基于单片机的单板层积材抗弯强度应力波波速检测系统
2.
Numerical simulation of hot-press temperature curve of laminated veneer lumber;
单板层积材热压升温曲线数值模拟的研究
3.
Study on the performance of laminated veneer lumber;
单板层积材力学性能研究
3) laminated veneer lumber(LVL)
单板层积材
1.
The hot-press temperature curves were researched and effects of hot-pressing temperature,thickness of veneer and the numbers of layer on mechanical properties of laminated veneer lumber(LVL)were analyzed with emphasis in the paper.
单板层积材(laminated veneer lumber,LVL)是一种新型结构板材,与OSB、PSL、MDF一起为20世纪80年。
2.
The properties of gluing Laminated Veneer Lumber(LVL) product were tested and reasonable technical parameters were determined.
该文采用正交实验法对毛白杨单板进行染色和阻燃处理,并进行单板层积材(LVL)的热压胶合试验研究,确定了单板染色、阻燃处理及热压工艺。
3.
This paper introduces the present study and utilization of Laminated Veneer Lumber(LVL) and dense LVL.
介绍了单板层积材、密实型单板层积材在国内外的研究和利用概况。
4) LVL
单板层积材
1.
A Study on Dimensional Stability of LVL and Solid Wood;
单板层积材和实木板材尺寸稳定性的初步研究
2.
Study on the dimensional stability of LVL and solid wood flooring;
几种实木地板和单板层积材尺寸稳定性的初步研究
3.
Study on Linearity Orientation by Means of Acoustic Emission Technology of Red River Gum and LVL;
对赤桉与单板层积材的声发射线性定位研究
5) laminated veneer lumber (LVL)
单板层积材
1.
Strengthened bamboo/wood composite laminated veneer lumber (LVL) was manufactured using poplar (Populus nigra) veneer and bamboo curtains as raw materials, impregnated with modified water-soluble PF resin.
以浸渍酚醛树脂的杨木单板和竹帘为原料制备竹木复合单板层积材,探讨制造工艺对复合材料性能的影响。
6) LVL parquet
单板层积材地板
补充资料：胶合层积材
| 胶合层积材 glulaminated wood 由多层成材或单板按纹理方向平行层叠胶合制成的复合材产品。简称胶合木。用成材顺纹层叠的制品常称胶合层积木。用旋切单板顺纹层叠胶合的板、方材称为单板层积材 。通过胶合木生产，可以把采伐作业和木材加工后的短、小料，以及人工林抚育间伐所得小径材用拼接、层叠、胶合技术 ，使短材成为长材（纵接），窄料成为宽料（横拼），薄板成为厚板（层积）。它可使小材变大材，劣材变优材，有助于缓和木材资源的紧缺，又能提供远非天然木材所能适应的特殊大型构件用材，兼有节约利用与合理利用木材资源的意义。胶合层积木的生产是将短材小料锯解成一定厚度的板方材 ，经人工干燥后将胶合面刨光。板材厚度要一致，宽度视需要拼接。涂胶后叠合，对胶面层施加一定压力，使其密合，并在一定压力和温度作用下使胶层固化，然后解除压力即成 。单板层积材生产是用旋切单板，由几层到几十层顺纹平行胶合而成。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条